enp1s0 イーサネットが機能しない

enp1s0 イーサネットが機能しない

Lenovo IdeaPad 310ノートブックにLinux LMDEがあるため、Wi-Fiインターネットは機能しますが、イーサネット、ケーブルを使用している場合は機能しません。ここにいくつかの出力があります。

so@notebook:~$ inxi -Fxz
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LANGUAGE = "en_US:en",
        LC_ALL = (unset),
        LANG = "en_US"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
System:    Host: notebook Kernel: 4.9.0-9-amd64 x86_64 bits: 64 compiler: gcc v: 6.3.0 Desktop: Cinnamon 4.0.10 
           Distro: LMDE 3 Cindy base: Debian 9.3 stretch 
Machine:   Type: Laptop System: LENOVO product: 80TV v: Lenovo ideapad 310-15IKB serial: <filter> 
           Mobo: LENOVO model: Torronto 5C2 v: NO DPK serial: <filter> UEFI [Legacy]: LENOVO v: 3JCN26WW date: 03/07/2017 
Battery:   ID-1: BAT0 charge: 25.2 Wh condition: 25.5/30.0 Wh (85%) model: SMP L15M2PB3 status: Unknown 
CPU:       Topology: Dual Core model: Intel Core i7-7500U bits: 64 type: MT MCP arch: Kaby Lake rev: 9 L2 cache: 4096 KiB 
           flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 23232 
           Speed: 704 MHz min/max: 400/3500 MHz Core speeds (MHz): 1: 704 2: 703 3: 689 4: 707 
Graphics:  Device-1: Intel vendor: Lenovo driver: i915 v: kernel bus ID: 00:02.0 
           Device-2: NVIDIA GM108M [GeForce 920MX] vendor: Lenovo driver: nouveau v: kernel bus ID: 03:00.0 
           Display: x11 server: X.Org 1.19.2 driver: modesetting,nouveau unloaded: fbdev,vesa resolution: 1920x1080~60Hz 
           OpenGL: renderer: Mesa DRI Intel HD Graphics 620 (Kabylake GT2) v: 4.5 Mesa 13.0.6 direct render: Yes 
Audio:     Device-1: Intel vendor: Lenovo driver: snd_hda_intel v: kernel bus ID: 00:1f.3 
           Sound Server: ALSA v: k4.9.0-9-amd64 
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Lenovo driver: r8168 v: 8.043.02-NAPI 
           port: 5000 bus ID: 01:00.0 
           IF: enp1s0 state: down mac: <filter> 
           Device-2: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter vendor: Lenovo driver: rtl8821ae v: kernel 
           port: 4000 bus ID: 02:00.0 
           IF: wlp2s0 state: up mac: <filter> 
           IF-ID-1: as0t0 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-2: as0t1 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-3: as0t2 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-4: as0t3 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-5: as0t4 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-6: as0t5 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-7: as0t6 state: unknown speed: 10 Mbps duplex: full mac: N/A 
           IF-ID-8: as0t7 state: unknown speed: 10 Mbps duplex: full mac: N/A 
Drives:    Local Storage: total: 1.82 TiB used: 582.02 GiB (31.2%) 
           ID-1: /dev/sda vendor: Seagate model: ST2000LM003 HN-M201RAD size: 1.82 TiB temp: 35 C 
Partition: ID-1: / size: 196.17 GiB used: 18.39 GiB (9.4%) fs: ext4 dev: /dev/sda7 
           ID-2: /home size: 196.17 GiB used: 158.74 GiB (80.9%) fs: ext4 dev: /dev/sda3 
Sensors:   System Temperatures: cpu: 37.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 277 Uptime: 25m Memory: 11.64 GiB used: 4.17 GiB (35.8%) Init: systemd runlevel: 5 Compilers: 
           gcc: 6.3.0 Shell: bash v: 4.4.12 inxi: 3.0.32 

そして

so@notebook:~$ ifconfig
enp1s0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether c8:5b:76:8b:3e:ae  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 125  base 0x9000  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 59905  bytes 3635977 (3.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 59905  bytes 3635977 (3.4 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.108  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::9440:4b06:b605:ca01  prefixlen 64  scopeid 0x20<link>
        ether c8:3d:d4:3c:23:63  txqueuelen 1000  (Ethernet)
        RX packets 9689  bytes 4781610 (4.5 MiB)
        RX errors 0  dropped 10  overruns 0  frame 0
        TX packets 5862  bytes 990587 (967.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

私はsudo apt-get install r8168-dkms私の

/etc/network/interfaces ファイルは次のとおりです。


# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d


# The loopback network interface
auto lo
iface lo inet loopback

allow-hotplug wlp2s0
#iface wlp2s0


#allow-hotplug enp1s0

#auto enp1s0
# iface enp1s0 inet dhcp

#https://askubuntu.com/questions/876631/ubuntu-server-16-04-static-ip-will-not-be-static
#auto enp1s0
#iface enp1s0 inet static
#        address 192.168.0.200
#        netmask 255.255.255.0
#        network 192.168.0.0
#        gateway 192.168.0.1
#        broadcast 192.168.0.255
#        dns-nameservers 192.168.0.1
#        dns-nameservers 8.8.8.8

この設定がある場合enp1s0

ここに画像の説明を入力してください。

また、インターネットも利用できませんでした。

修正する: Soheilの論文の答えに基づいて、次のスクリプトを試しました。

sudo dhclient  -r  #refreshed ip
sudo dhclient  # restarted ip

次の出力を取得します。

ここに画像の説明を入力してください。

ただし、Wi-Fi接続を無効にすると、次のようにオンラインにアクセスできなくなります。 ここに画像の説明を入力してください。

この時点で私は以下を持っています:

so@notebook:~$ ifconfig 
enp1s0: flags=-28669<UP,BROADCAST,MULTICAST,DYNAMIC>  mtu 1500
        ether c8:5b:76:8b:3e:ae  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 125  base 0x9000  

enp1s0:avahi: flags=-28669<UP,BROADCAST,MULTICAST,DYNAMIC>  mtu 1500
        inet 169.254.8.71  netmask 255.255.0.0  broadcast 169.254.255.255
        ether c8:5b:76:8b:3e:ae  txqueuelen 1000  (Ethernet)
        device interrupt 125  base 0x9000  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1  (Local Loopback)
        RX packets 831793  bytes 566001568 (539.7 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 831793  bytes 566001568 (539.7 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

では、この問題を解決するにはどうすればよいですか?

ありがとうございます。

答え1

~によるとこの問題これを行う:

https://tor.stackexchange.com/questions/10313/internet-only-works-with-tor-enabled

sudo dhclient  -r  #refreshed ip
sudo dhclient  # restarted ip

関連情報