特定の領域で特定のアプリケーションの新しいウィンドウを開くようにOpenboxを設定できますか?たとえば、アプリケーションAは画面の左上の象限に開き、アプリケーションBは左下の象限に、アプリケーションCは画面の右半分に開く必要があります。または、少なくともウィンドウを開く必要がある座標を設定してください。
何かを書きたいのですが、rc.xml
何かを知りません。
役に立つ場合は、lightdmとopenboxを使用してraspbianを実行しています。
答え1
applications
に行きますrc.xml
。あなたができることについての完全なコメントセクションがあります。ここにコピーがあります。
<!--
# this is an example with comments through out. use these to make your
# own rules, but without the comments of course.
# you may use one or more of the name/class/role/title/type rules to specify
# windows to match
<application name="the window's _OB_APP_NAME property (see obxprop)"
class="the window's _OB_APP_CLASS property (see obxprop)"
groupname="the window's _OB_APP_GROUP_NAME property (see obxprop)"
groupclass="the window's _OB_APP_GROUP_CLASS property (see obxprop)"
role="the window's _OB_APP_ROLE property (see obxprop)"
title="the window's _OB_APP_TITLE property (see obxprop)"
type="the window's _OB_APP_TYPE property (see obxprob)..
(if unspecified, then it is 'dialog' for child windows)">
# you may set only one of name/class/role/title/type, or you may use more
# than one together to restrict your matches.
# the name, class, role, and title use simple wildcard matching such as those
# used by a shell. you can use * to match any characters and ? to match
# any single character.
# the type is one of: normal, dialog, splash, utility, menu, toolbar, dock,
# or desktop
# when multiple rules match a window, they will all be applied, in the
# order that they appear in this list
# each rule element can be left out or set to 'default' to specify to not
# change that attribute of the window
<decor>yes</decor>
# enable or disable window decorations
<shade>no</shade>
# make the window shaded when it appears, or not
<position force="no">
# the position is only used if both an x and y coordinate are provided
# (and not set to 'default')
# when force is "yes", then the window will be placed here even if it
# says you want it placed elsewhere. this is to override buggy
# applications who refuse to behave
<x>center</x>
# a number like 50, or 'center' to center on screen. use a negative number
# to start from the right (or bottom for <y>), ie -50 is 50 pixels from
# the right edge (or bottom). use 'default' to specify using value
# provided by the application, or chosen by openbox, instead.
<y>200</y>
<monitor>1</monitor>
# specifies the monitor in a xinerama setup.
# 1 is the first head, or 'mouse' for wherever the mouse is
</position>
<size>
# the size to make the window.
<width>20</width>
# a number like 20, or 'default' to use the size given by the application.
# you can use fractions such as 1/2 or percentages such as 75% in which
# case the value is relative to the size of the monitor that the window
# appears on.
<height>30%</height>
</size>
<focus>yes</focus>
# if the window should try be given focus when it appears. if this is set
# to yes it doesn't guarantee the window will be given focus. some
# restrictions may apply, but Openbox will try to
<desktop>1</desktop>
# 1 is the first desktop, 'all' for all desktops
<layer>normal</layer>
# 'above', 'normal', or 'below'
<iconic>no</iconic>
# make the window iconified when it appears, or not
<skip_pager>no</skip_pager>
# asks to not be shown in pagers
<skip_taskbar>no</skip_taskbar>
# asks to not be shown in taskbars. window cycling actions will also
# skip past such windows
<fullscreen>yes</fullscreen>
# make the window in fullscreen mode when it appears
<maximized>true</maximized>
# 'Horizontal', 'Vertical' or boolean (yes/no)
</application>
# end of the example
-->
この特定の例では、結果は次のようになります。
<!-- A -->
<application name="A">
<decor>yes</decor>
<shade>no</shade>
<position force="no">
<!-- start pos at (0,0), top-left corner -->
<x>0</x>
<y>0</y>
<monitor>1</monitor>
</position>
<size>
<!-- go in height & width only 50%, one quarter of the screen -->
<width>50%</width>
<height>50%</height>
</size>
<focus>yes</focus>
<desktop>1</desktop>
<layer>normal</layer>
<iconic>no</iconic>
</application>
<!-- B -->
<application name="B">
<decor>yes</decor>
<shade>no</shade>
<position force="no">
<!-- start pos at (0,mid of screen), middle-left of screen -->
<x>0</x>
<y>50%</y>
<monitor>1</monitor>
</position>
<size>
<!-- go in height & width only 50%, one quarter of the screen -->
<width>50%</width>
<height>50%</height>
</size>
<focus>yes</focus>
<desktop>1</desktop>
<layer>normal</layer>
<iconic>no</iconic>
</application>
<!-- C -->
<application name="C">
<decor>yes</decor>
<shade>no</shade>
<position force="no">
<!-- start pos at (mid of screen, 0), top-mid of screen -->
<x>50%</x>
<y>0</y>
<monitor>1</monitor>
</position>
<size>
<!-- take up half the screen width, but all the height -->
<width>50%</width>
<height>100%</height>
</size>
<focus>yes</focus>
<desktop>1</desktop>
<layer>normal</layer>
<iconic>no</iconic>
</application>
_OB_APP_*
実行できる属性を見つけて、目的の属性があるobxprop | grep _OB_APP
ウィンドウをクリックします。