私が知っている限り、一部のHPノートブックでは、ファンコントロールサービスなどを有効にできず、そのようなサービスを使用しています。 kdenliveで6分の長さのクリップをレンダリングすると、sensors読み取り値はほぼ80度以下に低下しません。
5つのファンを備えた冷却プレートで約22度の周囲温度で動作します。
編集1：
kdenliveでもう18分の長さの動画で再試行しましたが、作成に約11分かかり、温度が何度も100度まで上がりました。
私はそれを使用していますこれ一つ。 Intel HD 530と専用NVIDIAを統合します。
一般に、文書を読み書きするときにC＃/ Qtコードを実行するときは35度程度を維持し、ビデオを見るときはほぼ45度以下に落ちません。
編集2：
shotcutでCPUを並列に使用するのではなく、でGPUアクセラレーションを使用すると、効果はそれほど大きくなく、kdenlive同じ18分のビデオをレンダリングするのに2分30秒もかかりません。shotcut以下は読み取り値のスナップショットです。
iTCO_wdt正確に何をすべきかわかりませんが、iTCO_vendor_supportこれらの（nmiとソフト）監視機能を有効にすると、CPU温度が100度に達する頻度が減少します。
CPUは平均温度95度でどのくらい動作できますか？
編集3：
処刑されたsensors-detect
[emon@haque ~]$ sudo sensors-detect
# sensors-detect revision $Revision$
# System: HP HP Pavilion Gaming Notebook [Type1ProductConfigId] (laptop)
# Board: HP 80A9
# Kernel: 4.19.61-1-lts x86_64
# Processor: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (6/94/3)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 17h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x8987
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.4: Sunrise Point-H (PCH)
Module i2c-dev loaded successfully.
Next adapter: SMBus I801 adapter at 5040 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 gmbus dpc (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: i915 gmbus dpb (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: i915 gmbus dpd (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes
Next adapter: DPDDC-A (i2c-4)
Do you want to scan it? (yes/NO/selectively): yes
Client found at address 0x18
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95233'... No
Probing for `National Semiconductor LM95234'... No
Probing for `National Semiconductor LM95235'... No
Probing for `National Semiconductor LM95245'... No
Probing for `National Semiconductor LM64'... No
Probing for `SMSC EMC1047'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP9808'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `ON CAT34TS02C'... No
Probing for `ON CAT34TS04'... No
Probing for `Atmel AT30TS00'... No
Probing for `Giantec GT30TS00'... No
Client found at address 0x19
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95231'... No
Probing for `National Semiconductor LM95241'... No
Probing for `National Semiconductor LM95245'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP9808'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `ON CAT34TS02C'... No
Probing for `ON CAT34TS04'... No
Probing for `Atmel AT30TS00'... No
Probing for `Giantec GT30TS00'... No
Client found at address 0x1a
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments TMP400'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... No
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `IDT TSE2004'... No
Probing for `IDT TS3001'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP9808'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP98244'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `ON CAT34TS02C'... No
Probing for `ON CAT34TS04'... No
Probing for `Atmel AT30TS00'... No
Probing for `Giantec GT30TS00'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Do you want to generate /etc/conf.d/lm_sensors? (YES/no):
Created symlink /etc/systemd/system/multi-user.target.wants/lm_sensors.service → /usr/lib/systemd/system/lm_sensors.service.
Unloading i2c-dev... OK
Unloading cpuid... OK
再起動後の状態は次のとおりです。
[emon@haque ~]$ sudo systemctl status lm_sensors.service
[sudo] password for emon:
● lm_sensors.service - Initialize hardware monitoring sensors
Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled; vendor preset: disabled)
Active: active (exited) since Sat 2019-08-03 18:36:22 +06; 19min ago
Process: 529 ExecStart=/sbin/modprobe -qab $BUS_MODULES $HWMON_MODULES (code=exited, status=0/SUCCESS)
Process: 534 ExecStart=/usr/bin/sensors -s (code=exited, status=0/SUCCESS)
Main PID: 534 (code=exited, status=0/SUCCESS)
Aug 03 18:36:21 haque systemd[1]: Starting Initialize hardware monitoring sensors...
Aug 03 18:36:22 haque systemd[1]: Started Initialize hardware monitoring sensors.
同じ18分の動画を再確認すると、kdenlive次の4つのスナップショットがあります。
何今後の計画？
答え1
選択してください
ファンが最高速度で動作すると仮定し、手動でコントロールスピードが良いわけではありません。通常、次の3つのオプションがあります。
- 熱流の増加
- 冷却面積の増加
- 熱生産の減少
ノートブックの場合、1と2のオプションは非常に制限されています。気流を確認することもできます。冷却ファンにほこりがある可能性があります。もう一つの可能性は、熱ペーストが磨耗したことである。これが起こると、CPUは熱くなりますが、デバイスから吹く空気は涼しくなります。
オプション3を調べることをお勧めします。使用CPU周波数スケーリングまたは - 存在する場合 - BIOSのオーバークロックメカニズムダウンクロックCPU。レンダリングプロセスは明らかに時間がかかりますが、システムはクールに保たれます。
nVidia GPUを使用すると、パフォーマンスプロファイルと時々クロックレートを選択できます。
答え2
温度制御は、さまざまな設定に関連する広範な問題です。
一見すると話しているようです。ファン制御~のため固定する温度の問題。このウィキ[1]ページを読んでみましたか？
その後、閲覧できます。エネルギー管理wiki[2]はい起源あなたの問題。
[1]https://wiki.archlinux.org/index.php/Fan_speed_control
[2]https://wiki.archlinux.org/index.php/Power_management