ddを使用してAndroidブートローダmtdblockをバックアップしましたが、インストールに問題があります。https://transfer.sh/yAxnI/bootloader.img。
$ file bootloader.img
bootloader.img: DOS/MBR boot sector; partition 1 : ID=0xb, start-CHS (0x1,0,1), end-CHS (0x1e0,254,63), startsector 16065, 7711200 sectors
$ sudo fdisk -l bootloader.img
Disk bootloader.img: 8 MiB, 8388608 bytes, 16384 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0000b99d
Device Boot Start End Sectors Size Id Type
bootloader.img1 16065 7727264 7711200 3.7G b W95 FAT32
⠀
$ sudo losetup -o 8225280 /dev/loop0 bootloader.img
$ sudo fsck -fv /dev/loop0
fsck from util-linux 2.35
e2fsck 1.45.5 (07-Jan-2020)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/loop0
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
⠀
$ sudo mount -t vfat -o loop,offset=8225280 bootloader.img /mnt/disk/
mount: /mnt/disk: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
⠀
答え1
バックアップが完了していません。 fdiskは3.7GBのうち8MiBしかコピーされていないと報告します。