だから私はRaspberry Pi 4をOpenWrtルーター(アクセスポイント、何と呼んでも)に設定する方法についての情報をインターネットから収集しました。 WiFiを動作させ、iPhoneから接続できるようになって嬉しいです。ああ。これまで私が思いついた内容は次のとおりです。https://docs.google.com/document/d/e/2PACX-1vQ2lDbAXV3b2Fzw9-LC7PRkirLQGqRH-iLm6cNcUz_b4lawJG_-57yWQKrYrbO8awSCcY_koax8os2e/pub(あいまいな形式で申し訳ありませんが、テスト中にこれを入力しました。) ACモードおよび/または80MHz帯域に入ることができないようです。私が去った後、"htmode": "VHT80"
ネットワークが消えたようです。うまく動作しているようですVHT20
。VHT40
また、いくつかの異なるチャンネル+のVHT80
組み合わせを試しましたが、役に立ちませんでした。
たぶん、誰かがこれについてもっと幸運になるでしょう。それとも、これはPiの現在のファームウェアの制限ですか?
2020年5月8日最新のスナップショットイメージ()でテスト中ですopenwrt-bcm27xx-bcm2711-rpi-4-ext4-factory
。
コメントありがとうございます!
編集(詳細情報を追加):
root@OpenWrt:~# ubus call system board
{
"kernel": "5.4.39",
"hostname": "OpenWrt",
"model": "Raspberry Pi 4 Model B Rev 1.1",
"board_name": "raspberrypi,4-model-b",
"release": {
"distribution": "OpenWrt",
"version": "SNAPSHOT",
"revision": "r13202-94f3449977",
"target": "bcm27xx/bcm2711",
"description": "OpenWrt SNAPSHOT r13202-94f3449977"
}
}
root@OpenWrt:~# wifi status
{
"radio0": {
"up": true,
"pending": false,
"autostart": true,
"disabled": false,
"retry_setup_failed": false,
"config": {
"hwmode": "11a",
"path": "platform/soc/fe300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1",
"legacy_rates": false,
"country": "LT",
"channel": "36",
"htmode": "VHT40"
},
"interfaces": [
{
"section": "default_radio0",
"ifname": "wlan0",
"config": {
"mode": "ap",
"ssid": "OpenWrt",
"encryption": "psk2",
"key": "fosron123",
"network": [
"lan"
],
"mode": "ap"
}
}
]
}
}
root@OpenWrt:~# iw dev
phy#0
Interface wlan0
ifindex 3
wdev 0x1
addr dc:a6:32:28:3f:42
ssid OpenWrt
type AP
channel 36 (5180 MHz), width: 40 MHz, center1: 5190 MHz
txpower 31.00 dBm
root@OpenWrt:~# iw list
Wiphy phy0
max # scan SSIDs: 10
max scan IEs length: 2048 bytes
max # sched scan SSIDs: 16
max # match sets: 16
max # scan plans: 1
max scan plan interval: 508
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* P2P-client
* P2P-GO
* P2P-device
Band 1:
Capabilities: 0x1022
HT20/HT40
Static SM Power Save
RX HT20 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x1062
HT20/HT40
Static SM Power Save
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 16 usec (0x07)
HT TX/RX MCS rate indexes supported: 0-7
VHT Capabilities (0x00001020):
Max MPDU length: 3895
Supported Channel Width: neither 160 nor 80+80
short GI (80 MHz)
SU Beamformee
VHT RX MCS set:
1 streams: MCS 0-9
2 streams: not supported
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT RX highest supported: 0 Mbps
VHT TX MCS set:
1 streams: MCS 0-9
2 streams: not supported
3 streams: not supported
4 streams: not supported
5 streams: not supported
6 streams: not supported
7 streams: not supported
8 streams: not supported
VHT TX highest supported: 0 Mbps
Frequencies:
* 5170 MHz [34] (20.0 dBm)
* 5180 MHz [36] (20.0 dBm)
* 5190 MHz [38] (20.0 dBm)
* 5200 MHz [40] (20.0 dBm)
* 5210 MHz [42] (20.0 dBm)
* 5220 MHz [44] (20.0 dBm)
* 5230 MHz [46] (20.0 dBm)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (radar detection)
* 5280 MHz [56] (20.0 dBm) (radar detection)
* 5300 MHz [60] (20.0 dBm) (radar detection)
* 5320 MHz [64] (20.0 dBm) (radar detection)
* 5500 MHz [100] (20.0 dBm) (radar detection)
* 5520 MHz [104] (20.0 dBm) (radar detection)
* 5540 MHz [108] (20.0 dBm) (radar detection)
* 5560 MHz [112] (20.0 dBm) (radar detection)
* 5580 MHz [116] (20.0 dBm) (radar detection)
* 5600 MHz [120] (20.0 dBm) (radar detection)
* 5620 MHz [124] (20.0 dBm) (radar detection)
* 5640 MHz [128] (20.0 dBm) (radar detection)
* 5660 MHz [132] (20.0 dBm) (radar detection)
* 5680 MHz [136] (20.0 dBm) (radar detection)
* 5700 MHz [140] (20.0 dBm) (radar detection)
* 5720 MHz [144] (disabled)
* 5745 MHz [149] (13.0 dBm)
* 5765 MHz [153] (13.0 dBm)
* 5785 MHz [157] (13.0 dBm)
* 5805 MHz [161] (13.0 dBm)
* 5825 MHz [165] (13.0 dBm)
valid interface combinations:
* #{ managed } <= 1, #{ P2P-device } <= 1, #{ P2P-client, P2P-GO } <= 1,
total <= 3, #channels <= 2
* #{ managed } <= 1, #{ AP } <= 1, #{ P2P-client } <= 1, #{ P2P-device } <= 1,
total <= 4, #channels <= 1
Supported extended features:
* [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode
* [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode
* [ DFS_OFFLOAD ]: DFS offload