「iw reg get」とWi-FiチップNo-IR周波数の違い

「iw reg get」とWi-FiチップNo-IR周波数の違い

私はIntel AX200 Wi-Fiチップを持っており、それを使ってフランスで5Ghz Wi-Fi APをホストしたいと思います。

を実行すると、iw reg get次の結果が表示されます。

global
country FR: DFS-ETSI
        (2400 - 2483 @ 40), (N/A, 20), (N/A)
        (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
        (5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
        (5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
        (5725 - 5875 @ 80), (N/A, 13), (N/A)
        (5945 - 6425 @ 160), (N/A, 23), (N/A), NO-OUTDOOR
        (57000 - 71000 @ 2160), (N/A, 40), (N/A)

phy#0 (self-managed)
country FR: DFS-UNSET
        (2402 - 2437 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-80MHZ, NO-160MHZ
        (2422 - 2462 @ 40), (6, 22), (N/A), AUTO-BW, NO-80MHZ, NO-160MHZ
        (2447 - 2482 @ 40), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-80MHZ, NO-160MHZ
        (5170 - 5190 @ 160), (6, 22), (N/A), NO-OUTDOOR, AUTO-BW, IR-CONCURRENT, NO-HT40MINUS, PASSIVE-SCAN
        (5190 - 5210 @ 160), (6, 22), (N/A), NO-OUTDOOR, AUTO-BW, IR-CONCURRENT, NO-HT40PLUS, PASSIVE-SCAN
        (5210 - 5230 @ 160), (6, 22), (N/A), NO-OUTDOOR, AUTO-BW, IR-CONCURRENT, NO-HT40MINUS, PASSIVE-SCAN
        (5230 - 5250 @ 160), (6, 22), (N/A), NO-OUTDOOR, AUTO-BW, IR-CONCURRENT, NO-HT40PLUS, PASSIVE-SCAN
        (5250 - 5270 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5270 - 5290 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5290 - 5310 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5310 - 5330 @ 160), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5490 - 5510 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5510 - 5530 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5530 - 5550 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5550 - 5570 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5570 - 5590 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5590 - 5610 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5610 - 5630 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, PASSIVE-SCAN
        (5630 - 5650 @ 240), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, PASSIVE-SCAN
        (5650 - 5670 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, NO-160MHZ, PASSIVE-SCAN
        (5670 - 5690 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, NO-160MHZ, PASSIVE-SCAN
        (5690 - 5710 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40MINUS, NO-160MHZ, PASSIVE-SCAN
        (5710 - 5730 @ 80), (6, 22), (0 ms), DFS, AUTO-BW, NO-HT40PLUS, NO-160MHZ, PASSIVE-SCAN
        (5735 - 5755 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
        (5755 - 5775 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
        (5775 - 5795 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-160MHZ
        (5795 - 5815 @ 80), (6, 22), (N/A), AUTO-BW, NO-HT40PLUS, NO-160MHZ
        (5815 - 5835 @ 20), (6, 22), (N/A), AUTO-BW, NO-HT40MINUS, NO-HT40PLUS, NO-80MHZ, NO-160MHZ

正しく理解した場合、Wi-Fiボードの国を変更することはできませんiw reg set。ただし、DFSが設定されていなくても、国は正確で正しく理解されていると、「No IR」の代わりに5GHzの周波数が有効になります。

しかし、ランニングはiw phy0 info私に次のことを示しました。

                Frequencies:
                        * 5180 MHz [36] (22.0 dBm) (no IR)
                        * 5200 MHz [40] (22.0 dBm) (no IR)
                        * 5220 MHz [44] (22.0 dBm) (no IR)
                        * 5240 MHz [48] (22.0 dBm) (no IR)
                        * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
                        * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
                        * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
                        * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
                        * 5340 MHz [68] (disabled)
                        * 5360 MHz [72] (disabled)
                        * 5380 MHz [76] (disabled)
                        * 5400 MHz [80] (disabled)
                        * 5420 MHz [84] (disabled)
                        * 5440 MHz [88] (disabled)
                        * 5460 MHz [92] (disabled)
                        * 5480 MHz [96] (disabled)
                        * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
                        * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
                        * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
                        * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
                        * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
                        * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
                        * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
                        * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
                        * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
                        * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
                        * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
                        * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
                        * 5745 MHz [149] (22.0 dBm)
                        * 5765 MHz [153] (22.0 dBm)
                        * 5785 MHz [157] (22.0 dBm)
                        * 5805 MHz [161] (22.0 dBm)
                        * 5825 MHz [165] (22.0 dBm)
                        * 5845 MHz [169] (disabled)
                        * 5865 MHz [173] (disabled)
                        * 5885 MHz [177] (disabled)
                        * 5905 MHz [181] (disabled)

ヨーロッパで許可されていない一部の周波数を除き、すべての5GHz周波数はディスエーブルまたはIRがありません。 Hostapdは、149〜165を含むすべての5GHzチャンネルでの実行を拒否します。何が間違っていますか?

  • 私はiw reg get出力を間違って理解していますか?
  • 出力が間違っていますかiw reg get

私ができることはありますか?

私はUbuntu 20.04、Linux 5.4.0-125-generic、crda 3.18を実行しています。

答え1

私はPASSIVE-SCANその旗がそれを暗示していると思いますNO-IR

関連情報