私はDebianを実行しており、SSDはNTFSでフォーマットされています。データがまだ存在する場合は、少なくともデータを再インポートしようとします。
認識されませんfdisk -l。そして当然、システムはそれを検出できません。
以下はコマンドの出力ですdmesg。
[ 40.241903] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 88.378502] sd 8:0:0:0: [sdc] Spinning up disk...
[ 293.776598] sd 8:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 293.776603] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current]
[ 293.776605] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
[ 353.948036] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 353.948040] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current]
[ 353.948041] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
[ 353.948549] sd 8:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[ 353.948552] sd 8:0:0:0: [sdc] 0-byte physical blocks
[ 404.835068] sd 8:0:0:0: tag#19 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 404.835073] sd 8:0:0:0: tag#19 CDB: Mode Sense(6) 1a 00 00 00 04 00
[ 415.059057] sd 8:0:0:0: tag#19 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 415.059060] sd 8:0:0:0: tag#19 CDB: Test Unit Ready 00 00 00 00 00 00
[ 415.225329] sd 8:0:0:0: Device offlined - not ready after error recovery
[ 415.225347] sd 8:0:0:0: [sdc] Write Protect is off
[ 415.225351] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 415.225359] sd 8:0:0:0: rejecting I/O to offline device
[ 415.225364] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 415.225366] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 415.225373] sd 8:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (0 bytes)
[ 415.263086] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 664.193579] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 712.330935] sd 8:0:0:0: [sdc] Spinning up disk...
[ 915.743226] sd 8:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 915.743230] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current]
[ 915.743232] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
[ 975.914872] sd 8:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 975.914876] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current]
[ 975.914878] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
[ 975.915430] sd 8:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[ 975.915433] sd 8:0:0:0: [sdc] 0-byte physical blocks
[ 1027.423926] sd 8:0:0:0: tag#25 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 1027.423931] sd 8:0:0:0: tag#25 CDB: Mode Sense(6) 1a 00 00 00 04 00
[ 1037.651350] sd 8:0:0:0: tag#25 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 1037.651356] sd 8:0:0:0: tag#25 CDB: Test Unit Ready 00 00 00 00 00 00
[ 1037.821667] sd 8:0:0:0: Device offlined - not ready after error recovery
[ 1037.821694] sd 8:0:0:0: [sdc] Write Protect is off
[ 1037.821698] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1037.821707] sd 8:0:0:0: rejecting I/O to offline device
[ 1037.821713] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1037.821715] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1037.821722] sd 8:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a multiple of physical block size (0 bytes)
[ 1037.859525] sd 8:0:0:0: [sdc] Attached SCSI disk
答え1
ディスクまたはそのコントローラにハードウェア障害があります。初期化に時間がかかり、完了するとブロックサイズが0バイトであることを報告し、そうであればドライブは0バイトを報告します。
LinuxまたはWindowsのどのソフトウェアもこの問題を解決できません。これがファームウェアアップデートで修正される可能性があるSSDファームウェアの深刻なバグではない限り、データとSSDの両方が消えたと仮定する必要があります。申し訳ありません。
しかし、USBドングルは価格が非常に安いと言われています。したがって、外部SSDケース（設計用途）を開き、他の手段を介してコンテナSSDを接続することが解決策になる可能性があります。