ocservエラー：仮想ホスト、認証方法を混在させることができません

インストールしようとしています。青ケサービス （オープンコネクトVPNサーバー）、次のスクリプトを使用してこのリポジトリ、CentOS 8.1で。スクリプトは、サーバー、証明書、ユーザーリスト、その他の設定を自動的に設定します。

install.sh走った後（スクリプトの内容は次のとおりです）、を使用してログを確認しましたが、journalctl -u ocserv結果は次のとおりです。

Starting OpenConnect SSL VPN server...
Started OpenConnect SSL VPN server.
note: skipping 'pid-file' config option
error: cannot open file /etc/letsencrypt/live/208.xx.xx.xx/fullchain>
Parsing plain auth method subconfig using legacy format
error: vhost:default: you cannot mix multiple authentication method>
ocserv.service: Main process exited, code=exited, status=1/FAILURE
ocserv.service: Failed with result 'exit-code'.

error: vhost:default: you cannot mix multiple authentication methodエラーは次の場所にあるようです。ソースコードはこちら。error: cannot open file /etc/letsencrypt/live..証明書に関するエラーもありますが、それが重要かどうかはわかりません。

マルチレベル認証関連の設定ファイルはどこにあり、vhost:defaultこの問題を解決するには？それとも私が誤りを間違って理解したのでしょうか？

ポリスチレン: コマンドの出力が必要な場合はコメントでお知らせください。

install.shスクリプト

#!/bin/bash
# openconnect/anyconnect server (ocserv) installer in centos + let's ecnrypt 
# 
# bash install.sh -f username-list-file -n host-name -e email-address

usage()
{
    echo "usage:"
    echo "bash install.sh -f username-list-file -n host-name -e email-address"
}


###### Main

LIST=""
HOST_NAME=""
EMAIL_ADDR=""

if [[ $(dnf -q check-update | wc -l) > 0 ]] ; then
    echo 'You must be updated before this script.'
    echo 'Run: yum update'
    exit
fi

while [[ $1 != "" ]]; do
    case $1 in
        -f | --list )     shift
                    LIST=$1
                                ;;
        -n | --hostname )     shift
                    HOST_NAME=$1
                                ;;
        -e | --email )      shift
                    EMAIL_ADDR=$1
                                ;;
        -h | --help )         usage
                                exit
                                ;;
        * )                   usage
                                exit 1
    esac
    echo $1;
    shift
done

if [[ $HOST_NAME == "" ]] || [[ $EMAIL_ADDR == "" ]] || [[ $LIST == "" ]] ; then
  usage
  exit
fi

echo '[10%  ] Start installation...'
yum -q update -y  > /dev/null &
wait
yum install epel-release -y > /dev/null &
wait
yum repolist enabled > /dev/null &
wait
yum -q update --assumeno > /dev/null &
wait

yum install iptables-services -y > /dev/null &
wait

yum install ocserv certbot -y > /dev/null &
wait

echo '[20%  ] Request a valid certificate...'
certbot certonly --standalone --non-interactive --preferred-challenges http --agree-tos --email $EMAIL_ADDR -d $HOST_NAME &
wait

echo '[30%  ] Changing the default settings...'
sed -i 's/auth = "pam"/#auth = "pam"\nauth = "plain\[\/etc\/ocserv\/ocpasswd]"/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/try-mtu-discovery = false/try-mtu-discovery = true/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/#dns = 192.168.1.2/dns = 1.1.1.1\ndns = 8.8.8.8/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/#tunnel-all-dns = true/tunnel-all-dns = true/' /etc/ocserv/ocserv.conf & # !=  = DNS Leak
wait
sed -i "s/server-cert = \/etc\/pki\/ocserv\/public\/server.crt/server-cert=\/etc\/letsencrypt\/live\/$HOST_NAME\/fullchain.pem/" /etc/ocserv/ocserv.conf &
wait
sed -i "s/server-key = \/etc\/pki\/ocserv\/private\/server.key/server-key=\/etc\/letsencrypt\/live\/$HOST_NAME\/privkey.pem/" /etc/ocserv/ocserv.conf &
wait
sed -i 's/ipv4-network = 192.168.1.0/ipv4-network = 192.168.2.0/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/#ipv4-network = 192.168.1.0/ipv4-network = 192.168.2.0/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/#ipv4-netmask = 255.255.255.0/ipv4-netmask = 255.255.255.0/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/max-clients = 16/max-clients = 128/' /etc/ocserv/ocserv.conf &
wait
sed -i 's/max-same-clients = 2/max-same-clients = 4/' /etc/ocserv/ocserv.conf &
wait
#sed -i 's/#mtu = 1420/mtu = 1420/' /etc/ocserv/ocserv.conf &
#sed -i 's/#route = default/route = default/' /etc/ocserv/ocserv.conf & # for use server like gateway = IP Leak
sed -i 's/no-route = 192.168.5.0\/255.255.255.0/#no-route = 192.168.5.0\/255.255.255.0/' /etc/ocserv/ocserv.conf &
wait
#sed -i 's/udp-port = 443/#udp-port = 443/' /etc/ocserv/ocserv.conf & # if there is a problem with DTLS/UDP
wait

echo '[40%  ] Adding iptables items...'
iptables -I INPUT -p tcp --dport 22 -j ACCEPT & # SSH port
wait
iptables -I INPUT -p tcp --dport 443 -j ACCEPT &
wait
iptables -I INPUT -p udp --dport 443 -j ACCEPT &
wait
iptables -I INPUT -p udp --dport 53 -j ACCEPT &
wait
iptables -t nat -A POSTROUTING -j MASQUERADE &
wait
iptables -I FORWARD -d 192.168.2.0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT &
wait
iptables -A FORWARD -s 192.168.2.0 -j ACCEPT &
wait

echo '[50%  ] Activating the ip_forward feature...'
echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.conf &
#echo "net.ipv4.conf.all.proxy_arp = 1" >> /etc/sysctl.conf
wait

sysctl -p & # apply wihout rebooting
wait

echo '[60%  ] Adding users...'
echo ''
if [[ $LIST != "" ]] ; then
  while read -r -a line; do
    if [[ "${line[0]}" != "" ]] ; then
      echo "   For user ${line[0]} password updated with ${line[1]}"
      echo "${line[1]}" | ocpasswd -c /etc/ocserv/ocpasswd "${line[0]}" &
      wait
    fi
  done < $LIST
fi

echo '[70%  ] Preparing ocserv service...'

systemctl enable ocserv.service &
wait

systemctl mask ocserv.socket &
wait

cp /lib/systemd/system/ocserv.service /etc/systemd/system/ocserv.service &
wait

sed -i 's/Requires=ocserv.socket/#Requires=ocserv.socket/' /etc/systemd/system/ocserv.service &
wait
sed -i 's/Also=ocserv.socket/#Also=ocserv.socket/' /etc/systemd/system/ocserv.service &
wait

systemctl daemon-reload &
wait
systemctl stop ocserv.socket > /dev/null &
wait
systemctl disable ocserv.socket > /dev/null &
wait

echo '[80%  ] Start ocserv service...'
systemctl restart ocserv.service > /dev/null &
wait
#systemctl status ocserv.service &
#wait

#iptables -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT & # Allow SSH port. Is this port really configured?
#iptables -P INPUT DROP & # If you have not ACCEPT the SSH port connection before, do not run this command! 
#wait

echo '[90%  ] Persistent iptables rules...'
iptables-save > /etc/iptables.rules &
wait

systemctl enable iptables &
wait

service iptables save &
wait

systemctl start iptables &
wait

echo '[100% ] Your VPN server is ready to use.'
echo ''
echo 'Please check the ocserv logs with: journalctl -u ocserv'
echo ''