websocatコマンドのパラメータは、このnginxカスタム設定と同じですか?

websocatコマンドのパラメータは、このnginxカスタム設定と同じですか?

このnginxカスタム設定があります。

server {
  listen 8080;
  server_name           subdomain.domain.my.id;
    location /vless-ws { # Consistent with the path of V2Ray configuration
      if ($http_upgrade != "websocket") { # Return 404 error when WebSocket upgrading negotiate failed
        return 404;
      }
      proxy_redirect off;
      proxy_pass http://127.0.0.1:19002;
      proxy_http_version 1.1;
      proxy_set_header Upgrade $http_upgrade;
      proxy_set_header Connection "upgrade";
      proxy_set_header Host $host;
      proxy_set_header X-Real-IP $remote_addr;
    }
}

これは長いオプションですwebsocat

(base) isysrg@isysresearch:~/tmp$ ./websocat --help=long option
websocat 1.12.0
Vitaly "_Vi" Shukela <[email protected]>
Command-line client for web sockets, like netcat/curl/socat for ws://.

USAGE:
    websocat ws://URL | wss://URL               (simple client)
    websocat -s port                            (simple server)
    websocat [FLAGS] [OPTIONS] <addr1> <addr2>  (advanced mode)

FLAGS:
        --stdout-announce-listening-ports       [A] Print a line to stdout for each port being listened
        --async-stdio                           [A] On UNIX, set stdin and stdout to nonblocking mode instead of
                                                spawning a thread. This should improve performance, but may break other
                                                programs running on the same console.
        --compress-deflate                      [A] Compress data coming to a WebSocket using deflate method. Affects
                                                only binary WebSocket messages.
        --compress-gzip                         [A] Compress data coming to a WebSocket using gzip method. Affects only
                                                binary WebSocket messages.
        --compress-zlib                         [A] Compress data coming to a WebSocket using zlib method. Affects only
                                                binary WebSocket messages.
        --dump-spec                             [A] Instead of running, dump the specifiers representation to stdout
    -e, --set-environment                       Set WEBSOCAT_* environment variables when doing exec:/cmd:/sh-c:
                                                Currently it's WEBSOCAT_URI and WEBSOCAT_CLIENT for
                                                request URI and client address (if TCP)
                                                Beware of ShellShock or similar security problems.
    -E, --exit-on-eof                           Close a data transfer direction if the other one reached EOF
        --foreachmsg-wait-read                  [A] Wait for reading to finish before closing foreachmsg:'s peer
        --jsonrpc                               Format messages you type as JSON RPC 2.0 method calls. First word
                                                becomes method name, the rest becomes parameters, possibly automatically
                                                wrapped in [].
        --jsonrpc-omit-jsonrpc                  [A] Omit `jsonrpc` field when using `--jsonrpc`, e.g. for Chromium
        --just-generate-key                     [A] Just a Sec-WebSocket-Key value without running main Websocat
        --linemode-strip-newlines               [A] Don't include trailing \n or \r\n coming from streams in WebSocket
                                                messages
    -0, --null-terminated                       Use \0 instead of \n for linemode
        --no-line                               [A] Don't automatically insert line-to-message transformation
        --no-exit-on-zeromsg                    [A] Don't exit when encountered a zero message. Zero messages are used
                                                internally in Websocat, so it may fail to close connection at all.
        --no-fixups                             [A] Don't perform automatic command-line fixups. May destabilize
                                                websocat operation. Use --dump-spec without --no-fixups to discover what
                                                is being inserted automatically and read the full manual about Websocat
                                                internal workings.
        --no-async-stdio                        [A] Inhibit using stdin/stdout in a nonblocking way if it is not a tty
    -1, --one-message                           Send and/or receive only one message. Use with --no-close and/or -u/-U.
        --oneshot                               Serve only once. Not to be confused with -1 (--one-message)
        --print-ping-rtts                       Print measured round-trip-time to stderr after each received WebSocket
                                                pong.
        --exec-exit-on-disconnect               [A] Make exec: or sh-c: or cmd: immediately exit when connection is
                                                closed, don't wait for termination.
        --exec-sighup-on-stdin-close            [A] Make exec: or sh-c: or cmd: send SIGHUP on UNIX when input is
                                                closed.
        --exec-sighup-on-zero-msg               [A] Make exec: or sh-c: or cmd: send SIGHUP on UNIX when facing incoming
                                                zero-length message.
    -q                                          Suppress all diagnostic messages, except of startup errors
        --reuser-send-zero-msg-on-disconnect    [A] Make reuse-raw: send a zero-length message to the peer when some
                                                clients disconnects.
    -s, --server-mode                           Simple server mode: specify TCP port or addr:port as single argument
    -S, --strict                                strict line/message mode: drop too long messages instead of splitting
                                                them, drop incomplete lines.
        --timestamp-monotonic                   [A] Use monotonic clock for `timestamp:` overlay
    -k, --insecure                              Accept invalid certificates and hostnames while connecting to TLS
        --udp-broadcast                         [A] Set SO_BROADCAST
        --udp-multicast-loop                    [A] Set IP[V6]_MULTICAST_LOOP
        --udp-oneshot                           [A] udp-listen: replies only one packet per client
        --udp-reuseaddr                         [A] Set SO_REUSEADDR for UDP socket. Listening TCP sockets are always
                                                reuseaddr.
        --uncompress-deflate                    [A] Uncompress data coming from a WebSocket using deflate method.
                                                Affects only binary WebSocket messages.
        --uncompress-gzip                       [A] Uncompress data coming from a WebSocket using deflate method.
                                                Affects only binary WebSocket messages.
        --uncompress-zlib                       [A] Uncompress data coming from a WebSocket using deflate method.
                                                Affects only binary WebSocket messages.
    -u, --unidirectional                        Inhibit copying data in one direction
    -U, --unidirectional-reverse                Inhibit copying data in the other direction (or maybe in both directions
                                                if combined with -u)
        --accept-from-fd                        [A] Do not call `socket(2)` in UNIX socket listener peer, start with
                                                `accept(2)` using specified file descriptor number as argument instead
                                                of filename
        --unlink                                [A] Unlink listening UNIX socket before binding to it
    -V, --version                               Prints version information
    -v                                          Increase verbosity level to info or further
    -b, --binary                                Send message to WebSockets as binary messages
    -n, --no-close                              Don't send Close message to websocket on EOF
        --websocket-ignore-zeromsg              [A] Silently drop incoming zero-length WebSocket messages. They may
                                                cause connection close due to usage of zero-len message as EOF flag
                                                inside Websocat.
    -t, --text                                  Send message to WebSockets as text messages
        --base64                                Encode incoming binary WebSocket messages in one-line Base64 If
                                                `--binary-prefix` (see `--help=full`) is set, outgoing WebSocket
                                                messages that start with the prefix are decoded from base64 prior to
                                                sending.
        --base64-text                           [A] Encode incoming text WebSocket messages in one-line Base64. I don't
                                                know whether it can be ever useful, but it's for symmetry with
                                                `--base64`.

OPTIONS:
        --socks5 <auto_socks5>
            Use specified address:port as a SOCKS5 proxy. Note that proxy authentication is not supported yet. Example:
            --socks5 127.0.0.1:9050
        --autoreconnect-delay-millis <autoreconnect_delay_millis>
            [A] Delay before reconnect attempt for `autoreconnect:` overlay. [default: 20]

        --basic-auth <basic_auth>
            Add `Authorization: Basic` HTTP request header with this base64-encoded parameter

        --queue-len <broadcast_queue_len>
            [A] Number of pending queued messages for broadcast reuser [default: 16]

    -B, --buffer-size <buffer_size>                                  Maximum message size, in bytes [default: 65536]
        --byte-to-exit-on <byte_to_exit_on>
            [A] Override the byte which byte_to_exit_on: overlay looks for [default: 28]

        --client-pkcs12-der <client_pkcs12_der>                      [A] Client identity TLS certificate
        --client-pkcs12-passwd <client_pkcs12_passwd>
            [A] Password for --client-pkcs12-der pkcs12 archive. Required on Mac.

        --close-reason <close_reason>
            Close connection with a reason message. This option only takes effect if --close-status-code option is
            provided as well.
        --close-status-code <close_status_code>                      Close connection with a status code.
    -H, --header <custom_headers>...
            Add custom HTTP header to websocket client request. Separate header name and value with a colon and
            optionally a single space. Can be used multiple times. Note that single -H may eat multiple further
            arguments, leading to confusing errors. Specify headers at the end or with equal sign like -H='X: y'.
        --server-header <custom_reply_headers>...
            Add custom HTTP header to websocket upgrade reply. Separate header name and value with a colon and
            optionally a single space. Can be used multiple times. Note that single -H may eat multiple further
            arguments, leading to confusing errors.
        --exec-args <exec_args>...
            [A] Arguments for the `exec:` specifier. Must be the last option, everything after it gets into the exec
            args list.
        --header-to-env <headers_to_env>...
            Forward specified incoming request header to H_* environment variable for `exec:`-like specifiers.

    -h, --help <help>
            See the help.
            --help=short is the list of easy options and address types
            --help=long lists all options and types (see [A] markers)
            --help=doc also shows longer description and examples.
        --inhibit-pongs <inhibit_pongs>
            [A] Stop replying to incoming WebSocket pings after specified number of replies

        --just-generate-accept <just_generate_accept>
            [A] Just a Sec-WebSocket-Accept value based on supplied Sec-WebSocket-Key value without running main
            Websocat
        --max-messages <max_messages>
            Maximum number of messages to copy in one direction.

        --max-messages-rev <max_messages_rev>
            Maximum number of messages to copy in the other direction.

        --conncap <max_parallel_conns>
            Maximum number of simultaneous connections for listening mode

        --max-sent-pings <max_sent_pings>
            [A] Stop sending pings after this number of sent pings

        --max-ws-frame-length <max_ws_frame_length>
            [A] Maximum size of incoming WebSocket frames, to prevent memory overflow [default: 104857600]

        --max-ws-message-length <max_ws_message_length>
            [A] Maximum size of incoming WebSocket messages (sans of one data frame), to prevent memory overflow
            [default: 209715200]
        --origin <origin>                                            Add Origin HTTP header to websocket client request
        --pkcs12-der <pkcs12_der>
            Pkcs12 archive needed to accept SSL connections, certificate and key.
            A command to output it: openssl pkcs12 -export -out output.pkcs12 -inkey key.pem -in cert.pem
            Use with -s (--server-mode) option or with manually specified TLS overlays.
            See moreexamples.md for more info.
        --pkcs12-passwd <pkcs12_passwd>
            Password for --pkcs12-der pkcs12 archive. Required on Mac.

    -p, --preamble <preamble>...
            Prepend copied data with a specified string. Can be specified multiple times.

    -P, --preamble-reverse <preamble_reverse>...
            Prepend copied data with a specified string (reverse direction). Can be specified multiple times.

        --request-header <request_headers>...
            [A] Specify HTTP request headers for `http-request:` specifier.

    -X, --request-method <request_method>                            [A] Method to use for `http-request:` specifier
        --request-uri <request_uri>                                  [A] URI to use for `http-request:` specifier
        --restrict-uri <restrict_uri>
            When serving a websocket, only accept the given URI, like `/ws`
            This liberates other URIs for things like serving static files or proxying.
    -F, --static-file <serve_static_files>...
            Serve a named static file for non-websocket connections.
            Argument syntax: <URI>:<Content-Type>:<file-path>
            Argument example: /index.html:text/html:index.html
            Directories are not and will not be supported for security reasons.
            Can be specified multiple times. Recommended to specify them at the end or with equal sign like `-F=...`,
            otherwise this option may eat positional arguments
        --socks5-bind-script <socks5_bind_script>
            [A] Execute specified script in `socks5-bind:` mode when remote port number becomes known.

        --socks5-destination <socks_destination>
            [A] Examples: 1.2.3.4:5678  2600:::80  hostname:5678

        --tls-domain <tls_domain>
            [A] Specify domain for SNI or certificate verification when using tls-connect: overlay

        --udp-multicast <udp_join_multicast_addr>...
            [A] Issue IP[V6]_ADD_MEMBERSHIP for specified multicast address. Can be specified multiple times.

        --udp-multicast-iface-v4 <udp_join_multicast_iface_v4>...
            [A] IPv4 address of multicast network interface. Has to be either not specified or specified the same number
            of times as multicast IPv4 addresses. Order matters.
        --udp-multicast-iface-v6 <udp_join_multicast_iface_v6>...
            [A] Index of network interface for IPv6 multicast. Has to be either not specified or specified the same
            number of times as multicast IPv6 addresses. Order matters.
        --udp-ttl <udp_ttl>                                          [A] Set IP_TTL, also IP_MULTICAST_TTL if applicable
        --protocol <websocket_protocol>
            Specify this Sec-WebSocket-Protocol: header when connecting

        --server-protocol <websocket_reply_protocol>
            Force this Sec-WebSocket-Protocol: header when accepting a connection

        --websocket-version <websocket_version>                      Override the Sec-WebSocket-Version value
        --binary-prefix <ws_binary_prefix>
            [A] Prepend specified text to each received WebSocket binary message. Also strip this prefix from outgoing
            messages, explicitly marking them as binary even if `--text` is specified
        --ws-c-uri <ws_c_uri>
            [A] URI to use for ws-c: overlay [default: ws://0.0.0.0/]

        --ping-interval <ws_ping_interval>                           Send WebSocket pings each this number of seconds
        --ping-timeout <ws_ping_timeout>
            Drop WebSocket connection if Pong message not received for this number of seconds

        --text-prefix <ws_text_prefix>
            [A] Prepend specified text to each received WebSocket text message. Also strip this prefix from outgoing
            messages, explicitly marking them as text even if `--binary` is specified

ARGS:
    <addr1>    In simple mode, WebSocket URL to connect. In advanced mode first address (there are many kinds of
               addresses) to use. See --help=types for info about address types. If this is an address for
               listening, it will try serving multiple connections.
    <addr2>    In advanced mode, second address to connect. If this is an address for listening, it will accept only
               one connection.


Basic examples:
  Command-line websocket client:
    websocat ws://ws.vi-server.org/mirror/
    
  WebSocket server
    websocat -s 8080
    
  WebSocket-to-TCP proxy:
    websocat --binary ws-l:127.0.0.1:8080 tcp:127.0.0.1:5678
    

Full list of address types:
        ws://                   Insecure (ws://) WebSocket client. Argument is host and URL.
        wss://                  Secure (wss://) WebSocket client. Argument is host and URL.
        ws-listen:              WebSocket server. Argument is host and port to listen.
        inetd-ws:               WebSocket inetd server. [A]
        l-ws-unix:              WebSocket UNIX socket-based server. [A]
        l-ws-abstract:          WebSocket abstract-namespaced UNIX socket server. [A]
        ws-lowlevel-client:     [A] Low-level HTTP-independent WebSocket client connection without associated HTTP upgrade.
        ws-lowlevel-server:     [A] Low-level HTTP-independent WebSocket server connection without associated HTTP upgrade.
        wss-listen:             Listen for secure WebSocket connections on a TCP port
        http:                   [A] Issue HTTP request, receive a 1xx or 2xx reply, then pass
        asyncstdio:             [A] Set stdin and stdout to nonblocking mode, then use it as a communication counterpart. UNIX-only.
        inetd:                  Like `asyncstdio:`, but intended for inetd(8) usage. [A]
        tcp:                    Connect to specified TCP host and port. Argument is a socket address.
        tcp-listen:             Listen TCP port on specified address.
        ssl-listen:             Listen for SSL connections on a TCP port
        sh-c:                   Start specified command line using `sh -c` (even on Windows)
        cmd:                    Start specified command line using `sh -c` or `cmd /C` (depending on platform)
        exec:                   Execute a program directly (without a subshell), providing array of arguments on Unix [A]
        readfile:               Synchronously read a file. Argument is a file path.
        writefile:              Synchronously truncate and write a file.
        appendfile:             Synchronously append a file.
        udp:                    Send and receive packets to specified UDP socket, from random UDP port  
        udp-listen:             Bind an UDP socket to specified host:port, receive packet
        open-async:             Open file for read and write and use it like a socket. [A]
        open-fd:                Use specified file descriptor like a socket. [A]
        threadedstdio:          [A] Stdin/stdout, spawning a thread (threaded version).
        -                       Read input from console, print to console. Uses threaded implementation even on UNIX unless requested by `--async-stdio` CLI option.
        unix:                   Connect to UNIX socket. Argument is filesystem path. [A]
        unix-listen:            Listen for connections on a specified UNIX socket [A]
        unix-dgram:             Send packets to one path, receive from the other. [A]
        abstract:               Connect to UNIX abstract-namespaced socket. Argument is some string used as address. [A]
        abstract-listen:        Listen for connections on a specified abstract UNIX socket [A]
        abstract-dgram:         Send packets to one address, receive from the other. [A]
        mirror:                 Simply copy output to input. No arguments needed.
        literalreply:           Reply with a specified string for each input packet.
        clogged:                Do nothing. Don't read or write any bytes. Keep connections in "hung" state. [A]
        literal:                Output a string, discard input.
        assert:                 Check the input.  [A]
        assert2:                Check the input. [A]
        seqpacket:              Connect to AF_UNIX SOCK_SEQPACKET socket. Argument is a filesystem path. [A]
        seqpacket-listen:       Listen for connections on a specified AF_UNIX SOCK_SEQPACKET socket [A]
        random:                 Generate random bytes when being read from, discard written bytes.
Full list of overlays:
        ws-upgrade:             WebSocket upgrader / raw server. Specify your own protocol instead of usual TCP. [A]
        http-request:           [A] Issue HTTP request, receive a 1xx or 2xx reply, then pass
        http-post-sse:          [A] Accept HTTP/1 request. Then, if it is GET,
        ssl-connect:            Overlay to add TLS encryption atop of existing connection [A]
        ssl-accept:             Accept an TLS connection using arbitrary backing stream. [A]
        reuse-raw:              Reuse subspecifier for serving multiple clients: unpredictable mode. [A]
        broadcast:              Reuse this connection for serving multiple clients, sending replies to all clients.
        autoreconnect:          Re-establish underlying connection on any error or EOF
        ws-c:                   Low-level WebSocket connector. Argument is a some another address. [A]
        msg2line:               Line filter: Turns messages from packet stream into lines of byte stream. [A]
        line2msg:               Line filter: turn lines from byte stream into messages as delimited by '\\n' or '\\0' [A]
        foreachmsg:             Execute something for each incoming message.
        log:                    Log each buffer as it pass though the underlying connector.
        jsonrpc:                [A] Turns messages like `abc 1,2` into `{"jsonrpc":"2.0","id":412, "method":"abc", "params":[1,2]}`.
        timestamp:              [A] Prepend timestamp to each incoming message.
        socks5-connect:         SOCKS5 proxy client (raw) [A]
        socks5-bind:            SOCKS5 proxy client (raw, bind command) [A]
        exit_on_specific_byte:  [A] Turn specific byte into a EOF, allowing user to escape interactive Websocat session

websocat上記のnginxサイト構成に基づいて、そのコマンドは何ですか?websocatオプションが多すぎるため、可能であると確信しています。それとも別の単純なWebソケットサーバーユーティリティがありますか?

答え1

最も近いWebsocatコマンドラインは次のとおりです。

websocat --restrict-uri /vless-ws -bE ws-l:0.0.0.0:8080 --binary-prefix B --text-prefix T ws://127.0.0.1:19002

しかし、まだ不完全な部分がたくさんあります:

  • 断線検知遅延
  • Ping応答は、最終エンドポイントではなくWebsocatによって応答されます。
  • メッセージサイズは Websocat バッファサイズによって制限されます。
  • X-Real-IP満たされていない
  • 一致のみ可能/vless-ws、一致しない、/vless-ws/または/vless-ws/something

なぜ127.0.0.1:19002をポート8080として公開しないのですか?ここに記載されていないNginx設定ファイルには他に何がありますか?

以下も使用できます。キャディNginxの代わりに、次の簡単な設定ファイルを使用して、root以外のユーザーとして簡単に実行できます。

{
    admin off
}
:8080

handle_path /vless-ws/* {
    reverse_proxy http://127.0.0.1:19002
}

明らかにWebsocket接続が渡されるので、これらのヘッダーを手動で指定する必要はありません。


websocatには多くのオプションがあるので、これができると確信しています。

Websocat(少なくともバージョン1以降)は、--restrict-uriオプション-Fなどのいくつかの例外を除いて、さまざまな着信URLを異なる方法で処理するようには設計されていません。ユーザーは、Webサーバーや一般的なツールなどの他のツールを使用してsocat失われたコンテンツを見つけることができると予想されます。他のツールで Websocat を使用するいくつかの例は、次のドキュメントで説明されています。その他の例.md

関連情報