HDDを接続できません/システムはHDDを読み取れません。 dmesg出力が何を意味するのかわかりません。

古いWindowsノートブックから取り出したハードドライブがありますが、保存したい情報がまったくないようです。 ext4などでフォーマットする予定です。

昨日接続して何かをしようとしたときに、ファイルシステムがきれいではないというエラーメッセージが表示されました。

実行したら、fdisk -l停止して端末を閉じる必要があります。

私はdmesgの出力をテキストファイルに記録しましたが、どの問題がリストされているのかわかりません。

出力リンクです長すぎてここに貼り付けることができません。

これは、記事をより独立して作成したり、出力に何が含まれているかについてのアイデアを提供するための抜粋です。誰でも役に立つといいと思います、乾杯

[137892.604695] wlan0: associated
[137897.517506] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[137897.517818] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[147331.327969] usb 3-2: new high-speed USB device number 14 using xhci_hcd
[147331.352116] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147331.352126] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147331.352131] usb 3-2: Product: VLI Product String
[147331.352136] usb 3-2: Manufacturer: VLI manufacture String
[147331.352140] usb 3-2: SerialNumber: 0000000000006283
[147331.353130] usb-storage 3-2:1.0: USB Mass Storage device detected
[147331.353335] scsi9 : usb-storage 3-2:1.0
[147332.340647] usb 4-2: Device not responding to set address.
[147332.548313] usb 4-2: Device not responding to set address.
[147332.749069] usb 4-2: device not accepting address 5, error -71
[147333.530241] usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
[147333.554400] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147333.554412] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147333.554417] usb 4-2: Product: VLI Product String
[147333.554422] usb 4-2: Manufacturer: VLI manufacture String
[147333.554426] usb 4-2: SerialNumber: 0000000000006283
[147333.556163] usb-storage 4-2:1.0: USB Mass Storage device detected
[147333.556436] scsi10 : usb-storage 4-2:1.0
[147333.557216] usb 3-2: USB disconnect, device number 14
[147335.029094] scsi 10:0:0:0: Direct-Access     Hitachi  HTS547575A9E     JE4O PQ: 0 ANSI: 2
[147335.029374] sd 10:0:0:0: Attached scsi generic sg3 type 0
[147335.032836] sd 10:0:0:0: [sdc] 1465149165 512-byte logical blocks: (750 GB/698 GiB)
[147335.033330] sd 10:0:0:0: [sdc] Write Protect is off
[147335.033333] sd 10:0:0:0: [sdc] Mode Sense: 03 00 00 00
[147335.033829] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.033832] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.038517] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.038520] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.102150]  sdc: sdc1 sdc2 < sdc5 sdc6 >
[147335.121804] sd 10:0:0:0: [sdc] No Caching mode page found
[147335.121809] sd 10:0:0:0: [sdc] Assuming drive cache: write through
[147335.121812] sd 10:0:0:0: [sdc] Attached SCSI disk
[147602.815372] usb 4-2: USB disconnect, device number 6
[147632.555007] usb 3-2: new high-speed USB device number 15 using xhci_hcd
[147632.579109] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147632.579119] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147632.579125] usb 3-2: Product: VLI Product String
[147632.579129] usb 3-2: Manufacturer: VLI manufacture String
[147632.579134] usb 3-2: SerialNumber: 0000000000006283
[147632.580093] usb-storage 3-2:1.0: USB Mass Storage device detected
[147632.580298] scsi11 : usb-storage 3-2:1.0
[147633.575692] usb 4-2: Device not responding to set address.
[147633.783359] usb 4-2: Device not responding to set address.
[147633.984083] usb 4-2: device not accepting address 7, error -71
[147634.765262] usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
[147634.789376] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147634.789386] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147634.789392] usb 4-2: Product: VLI Product String
[147634.789397] usb 4-2: Manufacturer: VLI manufacture String
[147634.789401] usb 4-2: SerialNumber: 0000000000006283
[147634.790854] usb-storage 4-2:1.0: USB Mass Storage device detected
[147634.791120] scsi12 : usb-storage 4-2:1.0
[147634.791635] usb 3-2: USB disconnect, device number 15
[147656.494733] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147656.511562] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147656.511566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147656.626851] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147656.643599] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147656.643602] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147662.763786] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147662.780621] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147662.780625] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147662.891897] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147662.908702] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147662.908705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147663.024010] usb 4-2: reset SuperSpeed USB device number 8 using xhci_hcd
[147663.040807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e00
[147663.040811] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880327a60e40
[147663.041710] scsi 12:0:0:0: Device offlined - not ready after error recovery
[147751.783571] usb 4-2: USB disconnect, device number 8
[147768.504680] usb 3-2: new high-speed USB device number 16 using xhci_hcd
[147768.528775] usb 3-2: New USB device found, idVendor=1631, idProduct=3200
[147768.528786] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147768.528791] usb 3-2: Product: VLI Product String
[147768.528796] usb 3-2: Manufacturer: VLI manufacture String
[147768.528800] usb 3-2: SerialNumber: 0000000000006283
[147768.529776] usb-storage 3-2:1.0: USB Mass Storage device detected
[147768.530051] scsi13 : usb-storage 3-2:1.0
[147769.525243] usb 4-2: Device not responding to set address.
[147769.728880] usb 4-2: Device not responding to set address.
[147769.929750] usb 4-2: device not accepting address 9, error -71
[147770.710935] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd
[147770.734206] usb 4-2: New USB device found, idVendor=1631, idProduct=3200
[147770.734208] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[147770.734209] usb 4-2: Product: VLI Product String
[147770.734210] usb 4-2: Manufacturer: VLI manufacture String
[147770.734211] usb 4-2: SerialNumber: 0000000000006283
[147770.735356] usb-storage 4-2:1.0: USB Mass Storage device detected
[147770.735492] scsi14 : usb-storage 4-2:1.0
[147770.735896] usb 3-2: USB disconnect, device number 16
[147772.975132] scsi 14:0:0:0: Direct-Access     WDC WD32 00BEVT-75A23     01.0 PQ: 0 ANSI: 2
[147772.975725] sd 14:0:0:0: Attached scsi generic sg3 type 0 

---

編集 - USBドライブを接続せずにdmesgを再実行しましたが、接続直後に1回、接続後数秒後に1回、2回実行しました.

最初のメッセージ

2番目のメッセージ

---

編集2

通常のポートの代わりにSuperSpeedポートを使用しましたが、間違いなくスムーズに動作するようです。

USBポートが4つありますが、どちらが速度なのかよくわかりません（色は指定されていません）。

最初のテストはポート1を使用して行われました。それでは別のポートをテストしましょう。これをテストするために使用しました。アダプター次に、次を実行しますdmesg > hdd.txt。

ポート2

ポート3

ポート4

ちなみに（私のラップトップを見るときどのポートが何であるか）：

port 2  | port 4
--------------------
port 1  | port 3