Kaby LakeシステムにDebianをインストールするのが難しい:X.org

Kaby LakeシステムにDebianをインストールするのが難しい:X.org

最近新しいコンピュータを購入しましたが、Debian システムを正常にインストールできません。それでは、私の設定と状態についてもっと詳しく説明しましょう。

パーソナルコンピュータ:

  • CPU:i7 7700K(Kaby Lake、Intel HD Graphics 630搭載)
  • マザーボード: MSi Z270 SLI PLUS
  • メモリ: Kingston HYPER 2x8GB RAM @ 2400MHz(12CL)
  • SSD:Intel 600 256GB

リリースバージョン:

Debian GNU/Linux 8.7 の提示

システムのインストール後、オペレーティングシステムは正常に起動しますが、xserverは低解像度(1024 x 768)でのみ実行されます。

ドライバの問題だと思い、ここからドライバをいくつかインストールしました。場所成功しませんでした。それから私はいくつかの新しいカーネルを試しました。

  • 3.16.43X
  • 3.18.20X
  • 4.1.39X
  • 4.4.59X
  • 4.9.20メートル
  • 4.10.8M
  • 4.11-rc5メートル

次のメッセージカーネル3.16.0-4がある/var/log/Xorg.0.log

画面が見つかりましたが、利用可能な設定はありません。

それから

致命的なサーバーエラー:画面が見つかりません

xorgi915モジュールの一部の設定や設定を変更しようとしましたが、成功しませんでした。

どんな助けでも大変感謝します。

ありがとうございます!

編集する:

手動でインストールされたすべてのカーネルを削除し、jessie-backportsからカーネル4.9をインストールし、xserver-xorg-video-intelドライバをアンインストールしてから、次のコマンドを実行します。

grep EE /var/log/Xorg.0.log

戻ってくる

    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.670] (EE) Failed to load module "intel" (module does not exist, 0)
[     2.671] (EE) open /dev/dri/card0: No such file or directory
[     2.671] (EE) open /dev/dri/card0: No such file or directory
[     2.672] (EE) open /dev/fb0: No such file or directory
[     2.672] (EE) open /dev/fb0: No such file or directory
[     2.672] (EE) Screen 0 deleted because of no matching config section.
[     2.672] (EE) Screen 0 deleted because of no matching config section.
[     2.672] (EE) Screen 0 deleted because of no matching config section.
[     2.672] (EE) Device(s) detected, but none match those in the config file.
[     2.672] (EE) 
[     2.672] (EE) no screens found(EE) 
[     2.672] (EE) 
[     2.672] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     2.672] (EE) 
[     2.672] (EE) Server terminated with error (1). Closing log file.

編集2:

全体的な/var/log/Xorg.0.log:

[     2.630] X Protocol Version 11, Revision 0
[     2.630] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[     2.630] Current Operating System: Linux Bobor 4.9.0-0.bpo.2-amd64 #1 SMP Debian 4.9.13-1~bpo8+1 (2017-02-27) x86_64
[     2.630] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-0.bpo.2-amd64 root=UUID=97e2dfda-29d2-44b4-ac08-80ea49496bb6 ro quiet
[     2.630] Build Date: 11 February 2015  12:32:02AM
[     2.630] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[     2.630] Current version of pixman: 0.32.6
[     2.630]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[     2.630] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     2.630] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  9 19:23:09 2017
[     2.631] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     2.632] (==) No Layout section.  Using the first Screen section.
[     2.632] (==) No screen section available. Using defaults.
[     2.632] (**) |-->Screen "Default Screen Section" (0)
[     2.632] (**) |   |-->Monitor "<default monitor>"
[     2.632] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[     2.632] (==) Automatically adding devices
[     2.632] (==) Automatically enabling devices
[     2.632] (==) Automatically adding GPU devices
[     2.634] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     2.634]    Entry deleted from font path.
[     2.636] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[     2.636] (==) ModulePath set to "/usr/lib/xorg/modules"
[     2.636] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[     2.636] (II) Loader magic: 0x559d23f1ed80
[     2.636] (II) Module ABI versions:
[     2.636]    X.Org ANSI C Emulation: 0.4
[     2.636]    X.Org Video Driver: 18.0
[     2.636]    X.Org XInput driver : 21.0
[     2.636]    X.Org Server Extension : 8.0
[     2.637] (--) PCI:*(0:0:2:0) 8086:5912:1462:7a59 rev 4, Mem @ 0xde000000/16777216, 0xc0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     2.637] (II) LoadModule: "glx"
[     2.638] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     2.644] (II) Module glx: vendor="X.Org Foundation"
[     2.644]    compiled for 1.16.4, module version = 1.0.0
[     2.644]    ABI class: X.Org Server Extension, version 8.0
[     2.644] (==) AIGLX enabled
[     2.644] (==) Matched intel as autoconfigured driver 0
[     2.644] (==) Matched modesetting as autoconfigured driver 1
[     2.644] (==) Matched fbdev as autoconfigured driver 2
[     2.644] (==) Matched vesa as autoconfigured driver 3
[     2.644] (==) Assigned the driver to the xf86ConfigLayout
[     2.644] (II) LoadModule: "intel"
[     2.645] (WW) Warning, couldn't open module intel
[     2.645] (II) UnloadModule: "intel"
[     2.645] (II) Unloading intel
[     2.645] (EE) Failed to load module "intel" (module does not exist, 0)
[     2.645] (II) LoadModule: "modesetting"
[     2.645] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     2.646] (II) Module modesetting: vendor="X.Org Foundation"
[     2.646]    compiled for 1.16.4, module version = 0.9.0
[     2.646]    Module class: X.Org Video Driver
[     2.646]    ABI class: X.Org Video Driver, version 18.0
[     2.646] (II) LoadModule: "fbdev"
[     2.646] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     2.646] (II) Module fbdev: vendor="X.Org Foundation"
[     2.646]    compiled for 1.15.99.904, module version = 0.4.4
[     2.646]    Module class: X.Org Video Driver
[     2.646]    ABI class: X.Org Video Driver, version 18.0
[     2.646] (II) LoadModule: "vesa"
[     2.646] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     2.646] (II) Module vesa: vendor="X.Org Foundation"
[     2.646]    compiled for 1.15.99.904, module version = 2.3.3
[     2.646]    Module class: X.Org Video Driver
[     2.646]    ABI class: X.Org Video Driver, version 18.0
[     2.646] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     2.646] (II) FBDEV: driver for framebuffer: fbdev
[     2.646] (II) VESA: driver for VESA chipsets: vesa
[     2.646] (++) using VT number 7

[     2.647] (EE) open /dev/dri/card0: No such file or directory
[     2.647] (WW) Falling back to old probe method for modesetting
[     2.647] (EE) open /dev/dri/card0: No such file or directory
[     2.647] (II) Loading sub module "fbdevhw"
[     2.647] (II) LoadModule: "fbdevhw"
[     2.647] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     2.647] (II) Module fbdevhw: vendor="X.Org Foundation"
[     2.647]    compiled for 1.16.4, module version = 0.0.2
[     2.647]    ABI class: X.Org Video Driver, version 18.0
[     2.647] (EE) open /dev/fb0: No such file or directory
[     2.647] (WW) Falling back to old probe method for fbdev
[     2.647] (II) Loading sub module "fbdevhw"
[     2.647] (II) LoadModule: "fbdevhw"
[     2.647] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     2.647] (II) Module fbdevhw: vendor="X.Org Foundation"
[     2.647]    compiled for 1.16.4, module version = 0.0.2
[     2.647]    ABI class: X.Org Video Driver, version 18.0
[     2.647] (EE) open /dev/fb0: No such file or directory
[     2.647] vesa: Ignoring device with a bound kernel driver
[     2.647] (WW) Falling back to old probe method for vesa
[     2.647] (EE) Screen 0 deleted because of no matching config section.
[     2.647] (II) UnloadModule: "modesetting"
[     2.647] (EE) Screen 0 deleted because of no matching config section.
[     2.647] (II) UnloadModule: "fbdev"
[     2.647] (II) UnloadSubModule: "fbdevhw"
[     2.647] (EE) Screen 0 deleted because of no matching config section.
[     2.647] (II) UnloadModule: "vesa"
[     2.647] (EE) Device(s) detected, but none match those in the config file.
[     2.647] (EE) 
Fatal server error:
[     2.647] (EE) no screens found(EE) 
[     2.647] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[     2.647] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[     2.647] (EE) 
[     2.647] (EE) Server terminated with error (1). Closing log file.

答え1

Kaby Lake(およびBroadwell以降のすべてのIntelグラフィックカード)の場合は、Jessieバックポートから新しいカーネルとファームウェアをルートとしてインストールする必要があります。

echo deb http://http.debian.net/debian jessie-backports main contrib non-free > /etc/apt/sources.list.d/jessie-backports.list
apt-get update
apt-get -t jessie-backports install linux-image-amd64 firmware-misc-nonfree

また必要です削除する(逆説的に)X.org Intelビデオドライバ(例:パッケージ指示:Xサーバーは、別のビデオドライバなしでカーネルのモード設定機能を使用できます。

apt-get remove xserver-xorg-video-intel

このコマンドを実行したときにapt-get他のパッケージが削除されるというメッセージが表示された場合は、依存関係を満たすためにインストールする必要がありますxserver-xorg-video-dummy

手動でインストールされたカーネルも削除する必要があります。

すべてのタスクが完了したら、再起動すると、システムがうまく機能することを確認できます。

失敗した場合は、バックポートされたIntelドライバ(新しいカーネルとファームウェアと共に)をインストールしてみてください。

apt-get -t jessie-backports install xserver-xorg-video-intel

答え2

Debian Buster Intelグラフィックカードの問題:

    1) Display cannot wake up after sleeping
    2) The whole the computer is suddenly freezing and overheating from time to time
    3) dmesg shows below errors:



firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2)
Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

コンピュータの詳細:

 user@debian-buster:~$ cat /proc/cpuinfo | grep 'model name'
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    model name  : Intel(R) Core(TM) i7-8550U CPU @ 1.80GHz
    user@debian-buster:~$

AMI BIOSを含む中国のマザーボード「GKBR1-VERC」:

user@debian-buster:~$ sudo dmidecode -t 2
dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
    Manufacturer: Default string
    Product Name: Default string
    Version: Default string
    Serial Number: Default string
    Asset Tag: Default string
    Features:
        Board is a hosting board
        Board is replaceable
    Location In Chassis: Default string
    Chassis Handle: 0x0003
    Type: Motherboard
    Contained Object Handles: 0

BIOSバージョン:

user@debian-buster:~$ sudo dmidecode --type bios
dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.1.1 present.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
    Vendor: American Megatrends Inc.
    Version: 5.12
    Release Date: 07/01/2018
    Address: 0xF0000
    Runtime Size: 64 kB
    ROM Size: 16 MB
    Characteristics:
        PCI is supported
        BIOS is upgradeable
        BIOS shadowing is allowed
        Boot from CD is supported
        Selectable boot is supported
        BIOS ROM is socketed
        EDD is supported
        5.25"/1.2 MB floppy services are supported (int 13h)
        3.5"/720 kB floppy services are supported (int 13h)
        3.5"/2.88 MB floppy services are supported (int 13h)
        Print screen service is supported (int 5h)
        Serial services are supported (int 14h)
        Printer services are supported (int 17h)
        ACPI is supported
        USB legacy is supported
        BIOS boot specification is supported
        Targeted content distribution is supported
        UEFI is supported
    BIOS Revision: 5.12

Handle 0x004B, DMI type 13, 22 bytes
BIOS Language Information
    Language Description Format: Long
    Installable Languages: 1
        en|US|iso8859-1
    Currently Installed Language: en|US|iso8859-1

user@debian-buster:~$

インテル統合グラフィックス:

user@debian-buster:~$ lspci -kk | grep -A3 VGA
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)
    Subsystem: Intel Corporation UHD Graphics 620
    Kernel driver in use: i915
    Kernel modules: i915
user@debian-buster:~$

コア:

 user@debian-buster:~/OS/deb/firmware$ uname -r
 4.19.0-8-amd64
 user@debian-buster:~/OS/deb/firmware$

解決策:

次のパッケージをインストールします。

xserver-xorg-video-intel

次のxorg設定ファイルを作成します。

 user@debian-buster:~$ cat /etc/X11/xorg.conf.d/10-intel.conf 
    Section "Device"
      Identifier "Intel Graphics"
      Driver "intel"
    Endsection
    user@debian-buster:~$

次のディレクトリを作成します。

 user@debian-buster:~$ ls -ld /lib/firmware/i915
    drwxr-xr-x 2 root root 4096 Mar 20 21:01 /lib/firmware/i915
    user@debian-buster:~$

Debianリポジトリから次の無料ソフトウェアパッケージをダウンロードしてください。

firmware-misc-nonfree_20190114-2_all.deb

開梱して、不足しているファームウェアを見つけます。

dpkg -x firmware-misc-nonfree_20190114-2_all.deb .



 user@debian-buster:~/OS/deb/firmware$ find | grep kbl_dmc_ver1_04.bin
    ./lib/firmware/i915/kbl_dmc_ver1_04.bin
    user@debian-buster:~/OS/deb/firmware$

ファームウェアを/lib/firmware/i915/ディレクトリに配置します。

sudo cp ./lib/firmware/i915/kbl_dmc_ver1_04.bin /lib/firmware/i915/

現在またはすべてのコアのinitramfsを更新します。

sudo update-initramfs -u -k all

再起動後にファームウェアをロードする必要があります。

 user@debian-buster:~/OS/deb/firmware$ sudo dmesg | grep kbl
    [sudo] password for user: 
    [    0.016859] ACPI: SSDT 0x000000007F7E1F68 000724 (v02 INTEL  xh_kbl-r 00000000 INTL 20160422)
    [    3.942920] i915 0000:00:02.0: firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
    [    3.943311] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
    user@debian-buster:~/OS/deb/firmware$ 

停止しなくなり、マウスまたはキーボードをタッチするとモニターが正しく起動します。 HTH

関連情報