8TB WD SATAドライブ接続時にdmesg例外が発生する

8TB WD SATAドライブ接続時にdmesg例外が発生する

systemd でシステムの初期化中に、dmesg で次の出力が観測されます。また、参照のために例外の前に何かを含めました。fdisk -l新しいディスクはリストされません。 Debianの実行中にドライブを接続しましたが、最初は何も気づいていませんでした(単にデバイスのリストを一覧表示しようとしました)。その後、再起動して接続しましたが、起動時にこれらの例外が発生しました(複数回繰り返されます)。

[    9.445662] systemd[1]: Started Journal Service.
[    9.491596] systemd-udevd[217]: starting version 215
[    9.552599] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
[    9.552605] ACPI: Power Button [PWRB]
[    9.552678] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    9.552681] ACPI: Power Button [PWRF]
[    9.556504] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.558170] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[    9.572940] wmi: Mapper loaded
[    9.582204] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
[    9.582212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.582217] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    9.582221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.582223] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    9.582228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.582230] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
[    9.582234] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\_GPE.GPIO) (20140424/utaddress-254)
[    9.582239] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.582240] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.591159] [drm] Initialized drm 1.1.0 20060810
[    9.594493] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    9.594565] ata4.00: irq_stat 0x40000001
[    9.594632] ata4.00: failed command: READ DMA EXT
[    9.594703] ata4.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 25 dma 4096 in
         res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
[    9.594796] ata4.00: status: { DRDY ERR }
[    9.594864] ata4.00: error: { ABRT }
[    9.597764] ata4.00: failed to enable AA (error_mask=0x1)
[    9.598186] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.598300] cfg80211: Calling CRDA to update world regulatory domain
[    9.599574] ata4.00: failed to enable AA (error_mask=0x1)
[    9.599812] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.599818] ata4.00: configured for UDMA/133 (device error ignored)
[    9.599836] ata4: EH complete
[    9.604646] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[    9.604718] ata4.00: irq_stat 0x40000001
[    9.604786] ata4.00: failed command: READ DMA EXT
[    9.604858] ata4.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 26 dma 4096 in
         res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
[    9.604950] ata4.00: status: { DRDY ERR }
[    9.605018] ata4.00: error: { ABRT }
[    9.605411] ata4.00: failed to enable AA (error_mask=0x1)
[    9.605673] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.606237] ata4.00: failed to enable AA (error_mask=0x1)
[    9.606467] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[    9.606472] ata4.00: configured for UDMA/133 (device error ignored)
[    9.606489] ata4: EH complete

関連する[解決済み]問題には似ていますが、同じではないエラーメッセージが含まれており、私のPSUは接続されている他のディスクドライブとうまく機能するため、それはすべてのようです。

関連情報