www-dataの代わりにphp-fpmユーザーをphp-userに設定する方法は？

私はphp5をサポートするためにDebianでphp-fpmとnginxを使用しています。私はphp-fpmがwww-dataではなく、ユーザーとグループのphp-userの下にあることを望みます。

init.dスクリプトは、ユーザーがwww-dataが記録されたファイルに言及または使用できるようにするようです。しかし、私はそれを見ませんでした。 php-user：php-userユーザーの下でこのプロセスを作成するにはどうすればよいですか？これは私のサーバーのphp5-fpm init.dスクリプトです。

start-stop-daemonのマニュアルページを見ようとしましたが、見えませんでした。これは簡単だと確信していますが、どうすればいいかわかりません。

#!/bin/sh
### BEGIN INIT INFO
# Provides:          php-fpm php5-fpm
# Required-Start:    $remote_fs $network
# Required-Stop:     $remote_fs $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: starts php5-fpm
# Description:       Starts PHP5 FastCGI Process Manager Daemon
### END INIT INFO

# Author: Ondrej Sury <[email protected]>

PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="PHP5 FastCGI Process Manager"
NAME=php5-fpm
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS="--fpm-config /etc/php5/fpm/php-fpm.conf"
PIDFILE=/var/run/php5-fpm.pid
TIMEOUT=30
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
. /lib/lsb/init-functions

#
# Function to check the correctness of the config file
#
do_check()
{
    [ "$1" != "no" ] && $DAEMON $DAEMON_ARGS -t 2>&1 | grep -v "\[ERROR\]"
    FPM_ERROR=$($DAEMON $DAEMON_ARGS -t 2>&1 | grep "\[ERROR\]")

    if [ -n "${FPM_ERROR}" ]; then
    echo "Please fix your configuration file..."
    $DAEMON $DAEMON_ARGS -t 2>&1 | grep "\[ERROR\]"
    return 1
    fi
    return 0
}

#
# Function that starts the daemon/service
#
do_start()
{
    # Return
    #   0 if daemon has been started
    #   1 if daemon was already running
    #   2 if daemon could not be started
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
        || return 1
    start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
        $DAEMON_ARGS 2>/dev/null \
        || return 2
    # Add code here, if necessary, that waits for the process to be ready
    # to handle requests from services started subsequently which depend
    # on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
    # Return
    #   0 if daemon has been stopped
    #   1 if daemon was already stopped
    #   2 if daemon could not be stopped
    #   other if a failure occurred
    start-stop-daemon --stop --quiet --retry=TERM/$TIMEOUT/KILL/5 --pidfile $PIDFILE --name $NAME
    RETVAL="$?"
    [ "$RETVAL" = 2 ] && return 2
    # Wait for children to finish too if this is a daemon that forks
    # and if the daemon is only ever run from this initscript.
    # If the above conditions are not satisfied then add some other code
    # that waits for the process to drop all resources that could be
    # needed by services started subsequently.  A last resort is to
    # sleep for some time.
    start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
    [ "$?" = 2 ] && return 2
    # Many daemons don't delete their pidfiles when they exit.
    rm -f $PIDFILE
    return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
    #
    # If the daemon can reload its configuration without
    # restarting (for example, when it is sent a SIGHUP),
    # then implement that here.
    #
    start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
    return 0
}

case "$1" in
    start)
    [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
    do_check $VERBOSE
    case "$?" in
        0)
        do_start
        case "$?" in
            0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
            2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
        1) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
    stop)
    [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
    do_stop
    case "$?" in
        0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
        2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    esac
    ;;
    status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
    check)
        do_check yes
    ;;
    reload|force-reload)
    log_daemon_msg "Reloading $DESC" "$NAME"
    do_reload
    log_end_msg $?
    ;;
    restart)
    log_daemon_msg "Restarting $DESC" "$NAME"
    do_stop
    case "$?" in
      0|1)
        do_start
        case "$?" in
            0) log_end_msg 0 ;;
            1) log_end_msg 1 ;; # Old process is still running
            *) log_end_msg 1 ;; # Failed to start
        esac
        ;;
      *)
        # Failed to stop
        log_end_msg 1
        ;;
    esac
    ;;
    *)
    echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2
    exit 1
    ;;
esac

: