gmp 5.0.5 mpfr 3.1.1エラーのあるgcc 4.6.3ローカルインストール

私もアクセスできるサーバーのホームディレクトリに新しいgccバージョン（g ++バージョン）をインストールしようとしています。サーバーにはすでに他の場所にgcc（およびgmpなど）がありますが、以前のバージョンではそうです。地元の新しいものをインストールしてください。

フォローするこのガイド厳密に言えば、私のホームディレクトリで作業します。とにかく、新しいtar（gcc、gmp、mpfr、mpc）をダウンロードして解凍し、gmp、mpfr、mpcをgccのソースディレクトリに移動しました（名前が、、次のようgmpにmpfr指定されていることを確認mpc）。その後、cd ..ソースコードを終了し、ビルドディレクトリ（objdir）に移動してそこから設定を実行しました。設定は問題なく進行しますが、「make」は最終的に次のものを返します。

checking for MPFR... yes
checking for recent GMP... yes
checking for recent MPFR... no
configure: error: MPFR version >= 2.4.2 required
make[2]: *** [configure-stage1-mpc] Error 1
make[2]: Leaving directory `/home/myusername/gcc-temp/objdir'
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory `/home/myusername/gcc-temp/objdir'
make: *** [all] Error 2

本当にバージョン2.4.2でなければなりませんか？これは問題ですか？

gccなどが他の場所にインストールされたという事実は、この問題を引き起こしますか？LD_LIBRARY_PATH=""他の場所を見ないようにするなど、いくつかの措置を取ったが、役に立たなかった。私はgmpを使うのに問題がないようだったので、gccのソースディレクトリでmpfrを使うのが良いと思いました。

完璧config.log：

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by configure, which was
generated by GNU Autoconf 2.64.  Invocation command line was

  $ /home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local

## --------- ##
## Platform. ##
## --------- ##

hostname = erased
uname -m = x86_64
uname -r = 2.6.18-308.1.1.el5
uname -s = Linux
uname -v = #1 SMP Fri Feb 17 16:51:01 EST 2012

/usr/bin/uname -p = unknown
/bin/uname -X     = unknown

/bin/arch              = x86_64
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /opt/streamline/bin
PATH: /opt/streamline/sbin
PATH: /software/bin
PATH: /usr/kerberos/bin
PATH: /opt/intel/Compiler/11.1/bin/intel64/
PATH: /opt/absoft/bin
PATH: /opt/pgi//linux86-64/9.0/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /opt/pathscale/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2222: checking build system type
configure:2236: result: x86_64-unknown-linux-gnu
configure:2283: checking host system type
configure:2296: result: x86_64-unknown-linux-gnu
configure:2316: checking target system type
configure:2329: result: x86_64-unknown-linux-gnu
configure:2383: checking for a BSD-compatible install
configure:2451: result: /usr/bin/install -c
configure:2462: checking whether ln works
configure:2484: result: yes
configure:2488: checking whether ln -s works
configure:2492: result: yes
configure:2499: checking for a sed that does not truncate output
configure:2563: result: /bin/sed
configure:2572: checking for gawk
configure:2588: found /bin/gawk
configure:2599: result: gawk
configure:3913: checking for gcc
configure:3929: found /usr/bin/gcc
configure:3940: result: gcc
configure:4169: checking for C compiler version
configure:4178: gcc --version >&5
gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4189: $? = 0
configure:4178: gcc -v >&5
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)
configure:4189: $? = 0
configure:4178: gcc -V >&5
gcc: '-V' option must have argument
configure:4189: $? = 1
configure:4178: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:4189: $? = 1
configure:4209: checking for C compiler default output file name
configure:4231: gcc    conftest.c  >&5
configure:4235: $? = 0
configure:4272: result: a.out
configure:4288: checking whether the C compiler works
configure:4297: ./a.out
configure:4301: $? = 0
configure:4316: result: yes
configure:4323: checking whether we are cross compiling
configure:4325: result: no
configure:4328: checking for suffix of executables
configure:4335: gcc -o conftest    conftest.c  >&5
configure:4339: $? = 0
configure:4361: result: 
configure:4367: checking for suffix of object files
configure:4389: gcc -c   conftest.c >&5
configure:4393: $? = 0
configure:4414: result: o
configure:4418: checking whether we are using the GNU C compiler
configure:4437: gcc -c   conftest.c >&5
configure:4437: $? = 0
configure:4446: result: yes
configure:4455: checking whether gcc accepts -g
configure:4475: gcc -c -g  conftest.c >&5
configure:4475: $? = 0
configure:4516: result: yes
configure:4533: checking for gcc option to accept ISO C89
configure:4597: gcc  -c -g -O2  conftest.c >&5
configure:4597: $? = 0
configure:4610: result: none needed
configure:4688: checking for g++
configure:4704: found /usr/bin/g++
configure:4715: result: g++
configure:4742: checking for C++ compiler version
configure:4751: g++ --version >&5
g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:4762: $? = 0
configure:4751: g++ -v >&5
Using built-in specs.
Target: x86_64-redhat-linux
Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux
Thread model: posix
gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)
configure:4762: $? = 0
configure:4751: g++ -V >&5
g++: '-V' option must have argument
configure:4762: $? = 1
configure:4751: g++ -qversion >&5
g++: unrecognized option '-qversion'
g++: no input files
configure:4762: $? = 1
configure:4766: checking whether we are using the GNU C++ compiler
configure:4785: g++ -c   conftest.cpp >&5
configure:4785: $? = 0
configure:4794: result: yes
configure:4803: checking whether g++ accepts -g
configure:4823: g++ -c -g  conftest.cpp >&5
configure:4823: $? = 0
configure:4864: result: yes
configure:4953: checking for gnatbind
configure:4983: result: no
configure:5045: checking for gnatmake
configure:5075: result: no
configure:5094: checking whether compiler driver understands Ada
configure:5117: result: no
configure:5126: checking how to compare bootstrapped objects
configure:5151: result: cmp --ignore-initial=16 $$f1 $$f2
configure:5167: checking for objdir
configure:5182: result: .libs
configure:5724: checking for PWL_handle_timeout in -lpwl
configure:5749: gcc -o conftest -g -O2    conftest.c -lpwl   >&5
/usr/bin/ld: cannot find -lpwl
collect2: ld returned 1 exit status
configure:5749: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| 
| /* Override any GCC internal prototype to avoid an error.
|    Use char because int might match the return type of a GCC
|    builtin and then its argument prototype would still apply.  */
| #ifdef __cplusplus
| extern "C"
| #endif
| char PWL_handle_timeout ();
| int
| main ()
| {
| return PWL_handle_timeout ();
|   ;
|   return 0;
| }
configure:5758: result: no
configure:5772: checking for version 0.11 (revision 0 or later) of PPL
configure:5789: gcc -c -g -O2  -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src   conftest.c >&5
conftest.c:10:19: error: ppl_c.h: No such file or directory
conftest.c: In function 'main':
conftest.c:16: error: 'choke' undeclared (first use in this function)
conftest.c:16: error: (Each undeclared identifier is reported only once
conftest.c:16: error: for each function it appears in.)
conftest.c:16: error: expected ';' before 'me'
configure:5789: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| #define LT_OBJDIR ".libs/"
| /* end confdefs.h.  */
| #include "ppl_c.h"
| int
| main ()
| {
| 
|     #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11
|     choke me
|     #endif
| 
|   ;
|   return 0;
| }
configure:5793: result: no
configure:7214: checking for default BUILD_CONFIG
configure:7246: result: bootstrap-debug
configure:7736: checking for bison
configure:7752: found /usr/bin/bison
configure:7763: result: bison -y
configure:7784: checking for bison
configure:7800: found /usr/bin/bison
configure:7811: result: bison
configure:7831: checking for gm4
configure:7861: result: no
configure:7831: checking for gnum4
configure:7861: result: no
configure:7831: checking for m4
configure:7847: found /usr/bin/m4
configure:7858: result: m4
configure:7878: checking for flex
configure:7894: found /usr/bin/flex
configure:7905: result: flex
configure:7926: checking for flex
configure:7942: found /usr/bin/flex
configure:7953: result: flex
configure:7973: checking for makeinfo
configure:7989: found /usr/bin/makeinfo
configure:8000: result: makeinfo
configure:8034: checking for expect
configure:8064: result: no
configure:8083: checking for runtest
configure:8113: result: no
configure:8228: checking for ar
configure:8244: found /usr/bin/ar
configure:8255: result: ar
configure:8369: checking for as
configure:8385: found /usr/bin/as
configure:8396: result: as
configure:8510: checking for dlltool
configure:8540: result: no
configure:8651: checking for ld
configure:8667: found /usr/bin/ld
configure:8678: result: ld
configure:8792: checking for lipo
configure:8822: result: no
configure:8933: checking for nm
configure:8949: found /usr/bin/nm
configure:8960: result: nm
configure:9074: checking for ranlib
configure:9090: found /usr/bin/ranlib
configure:9101: result: ranlib
configure:9210: checking for strip
configure:9226: found /usr/bin/strip
configure:9237: result: strip
configure:9346: checking for windres
configure:9376: result: no
configure:9487: checking for windmc
configure:9517: result: no
configure:9628: checking for objcopy
configure:9644: found /usr/bin/objcopy
configure:9655: result: objcopy
configure:9769: checking for objdump
configure:9785: found /usr/bin/objdump
configure:9796: result: objdump
configure:9949: checking for cc
configure:9965: found /usr/bin/cc
configure:9976: result: cc
configure:10110: checking for c++
configure:10126: found /usr/bin/c++
configure:10137: result: c++
configure:10271: checking for gcc
configure:10287: found /usr/bin/gcc
configure:10298: result: gcc
configure:10427: checking for gcj
configure:10443: found /usr/bin/gcj
configure:10454: result: gcj
configure:10588: checking for gfortran
configure:10604: found /usr/bin/gfortran
configure:10615: result: gfortran
configure:10749: checking for gccgo
configure:10779: result: no
configure:10840: checking for ar
configure:10873: result: no
configure:10990: checking for ar
configure:11006: found /usr/bin/ar
configure:11017: result: ar
configure:11070: checking for as
configure:11103: result: no
configure:11220: checking for as
configure:11236: found /usr/bin/as
configure:11247: result: as
configure:11300: checking for dlltool
configure:11333: result: no
configure:11450: checking for dlltool
configure:11480: result: no
configure:11530: checking for ld
configure:11563: result: no
configure:11680: checking for ld
configure:11696: found /usr/bin/ld
configure:11707: result: ld
configure:11760: checking for lipo
configure:11793: result: no
configure:11910: checking for lipo
configure:11940: result: no
configure:11990: checking for nm
configure:12023: result: no
configure:12140: checking for nm
configure:12156: found /usr/bin/nm
configure:12167: result: nm
configure:12220: checking for objdump
configure:12253: result: no
configure:12370: checking for objdump
configure:12386: found /usr/bin/objdump
configure:12397: result: objdump
configure:12450: checking for ranlib
configure:12483: result: no
configure:12600: checking for ranlib
configure:12616: found /usr/bin/ranlib
configure:12627: result: ranlib
configure:12680: checking for strip
configure:12713: result: no
configure:12830: checking for strip
configure:12846: found /usr/bin/strip
configure:12857: result: strip
configure:12910: checking for windres
configure:12943: result: no
configure:13060: checking for windres
configure:13090: result: no
configure:13140: checking for windmc
configure:13173: result: no
configure:13290: checking for windmc
configure:13320: result: no
configure:13348: checking where to find the target ar
configure:13381: result: host tool
configure:13390: checking where to find the target as
configure:13423: result: host tool
configure:13432: checking where to find the target cc
configure:13455: result: just compiled
configure:13474: checking where to find the target c++
configure:13500: result: just compiled
configure:13519: checking where to find the target c++ for libstdc++
configure:13545: result: just compiled
configure:13564: checking where to find the target dlltool
configure:13597: result: host tool
configure:13606: checking where to find the target gcc
configure:13629: result: just compiled
configure:13648: checking where to find the target gcj
configure:13674: result: just compiled
configure:13693: checking where to find the target gfortran
configure:13719: result: just compiled
configure:13738: checking where to find the target gccgo
configure:13774: result: host tool
configure:13783: checking where to find the target ld
configure:13816: result: host tool
configure:13825: checking where to find the target lipo
configure:13847: result: host tool
configure:13856: checking where to find the target nm
configure:13889: result: host tool
configure:13898: checking where to find the target objdump
configure:13931: result: host tool
configure:13940: checking where to find the target ranlib
configure:13973: result: host tool
configure:13982: checking where to find the target strip
configure:14015: result: host tool
configure:14024: checking where to find the target windres
configure:14057: result: host tool
configure:14066: checking where to find the target windmc
configure:14099: result: host tool
configure:14136: checking whether to enable maintainer-specific portions of Makefiles
configure:14145: result: no
configure:14178: checking whether -fkeep-inline-functions is supported
configure:14197: gcc -c -g -O2 -fkeep-inline-functions  conftest.c >&5
configure:14197: $? = 0
configure:14198: result: yes
configure:14395: creating ./config.status

## ---------------------- ##
## Running config.status. ##
## ---------------------- ##

This file was extended by config.status, which was
generated by GNU Autoconf 2.64.  Invocation command line was

  CONFIG_FILES    = 
  CONFIG_HEADERS  = 
  CONFIG_LINKS    = 
  CONFIG_COMMANDS = 
  $ ./config.status 

on lin04.hpc.nottingham.ac.uk

config.status:996: creating Makefile

## ---------------- ##
## Cache variables. ##
## ---------------- ##

#### ---snip---
#### (cut ac_cv_xxx variables so that the log would fit in the post)

acx_cv_cc_gcc_supports_ada=no
acx_cv_prog_LN=ln
gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2'
gcc_cv_tool_dirs=/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu:/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.3:/usr/lib/gcc/x86_64-unknown-linux-gnu:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin:
gcc_cv_tool_prefix=/home/myusername/opt/gcc-4.6.3
lt_cv_objdir=.libs

## ----------------- ##
## Output variables. ##
## ----------------- ##

AR='ar'
AR_FOR_BUILD='$(AR)'
AR_FOR_TARGET='$(AR)'
AS='as'
AS_FOR_BUILD='$(AS)'
AS_FOR_TARGET='$(AS)'
AWK='gawk'
BISON='bison'
BUILD_CONFIG='bootstrap-debug'
CC='gcc'
CC_FOR_BUILD='$(CC)'
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
CFLAGS='-g -O2'
CFLAGS_FOR_BUILD='-g -O2'
CFLAGS_FOR_TARGET='-g -O2'
COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'
CONFIGURE_GDB_TK=''
CPPFLAGS=''
CXX='g++'
CXXFLAGS='-g -O2'
CXXFLAGS_FOR_BUILD='-g -O2'
CXXFLAGS_FOR_TARGET='-g -O2'
CXX_FOR_BUILD='$(CXX)'
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
DEBUG_PREFIX_CFLAGS_FOR_TARGET=''
DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"'
DLLTOOL='dlltool'
DLLTOOL_FOR_BUILD='$(DLLTOOL)'
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EXEEXT=''
EXPECT='expect'
FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include'
FLEX='flex'
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
GCC_SHLIB_SUBDIR=''
GCJ_FOR_BUILD='$(GCJ)'
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
GDB_TK=''
GFORTRAN_FOR_BUILD='$(GFORTRAN)'
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
GNATBIND='no'
GNATMAKE='no'
GOC_FOR_BUILD='$(GOC)'
GOC_FOR_TARGET='$(GOC)'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_GDB_TK=''
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
LD='ld'
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LD_FOR_BUILD='$(LD)'
LD_FOR_TARGET='$(LD)'
LEX='flex'
LIBOBJS=''
LIBS=''
LIPO='lipo'
LIPO_FOR_TARGET='$(LIPO)'
LN='ln'
LN_S='ln -s'
LTLIBOBJS=''
M4='m4'
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='makeinfo'
NM='nm'
NM_FOR_BUILD='$(NM)'
NM_FOR_TARGET='$(NM)'
OBJCOPY='objcopy'
OBJDUMP='objdump'
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
OBJEXT='o'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_URL=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
RANLIB='ranlib'
RANLIB_FOR_BUILD='$(RANLIB)'
RANLIB_FOR_TARGET='$(RANLIB)'
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
RPATH_ENVVAR='LD_LIBRARY_PATH'
RUNTEST='runtest'
SED='/bin/sed'
SHELL='/bin/sh'
STRIP='strip'
STRIP_FOR_TARGET='$(STRIP)'
SYSROOT_CFLAGS_FOR_TARGET=''
TOPLEVEL_CONFIGURE_ARGUMENTS='/home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local'
WINDMC='windmc'
WINDMC_FOR_BUILD='$(WINDMC)'
WINDMC_FOR_TARGET='$(WINDMC)'
WINDRES='windres'
WINDRES_FOR_BUILD='$(WINDRES)'
WINDRES_FOR_TARGET='$(WINDRES)'
YACC='bison -y'
ac_ct_CC='gcc'
ac_ct_CXX='g++'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_configargs=' --cache-file=../config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
build_configdirs=' libiberty fixincludes'
build_cpu='x86_64'
build_libsubdir='build-x86_64-unknown-linux-gnu'
build_noncanonical='x86_64-unknown-linux-gnu'
build_os='linux-gnu'
build_subdir='build-x86_64-unknown-linux-gnu'
build_tooldir='${exec_prefix}/x86_64-unknown-linux-gnu'
build_vendor='unknown'
clooginc=''
clooglibs=''
compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*'
config_shell='/bin/sh'
configdirs=' intl libiberty zlib libcpp libdecnumber gmp mpfr mpc fixincludes gcc lto-plugin'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
do_compare='cmp --ignore-initial=16 $$f1 $$f2'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='${prefix}'
extra_host_libiberty_configure_flags='--enable-shared'
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/.libs'
extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs'
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src '
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_configargs=' --cache-file=./config.cache  '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
host_cpu='x86_64'
host_noncanonical='x86_64-unknown-linux-gnu'
host_os='linux-gnu'
host_subdir='.'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
oldincludedir='/usr/include'
pdfdir='${docdir}'
poststage1_ldflags='-static-libstdc++ -static-libgcc'
poststage1_libs=''
pplinc=''
ppllibs=''
prefix='/home/myusername/opt/gcc-4.6.3'
program_transform_name='s,y,y,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
stage1_cflags='-g -fkeep-inline-functions'
stage1_checking='--enable-checking=yes,types'
stage1_languages='c,lto'
stage1_ldflags=''
stage1_libs=''
stage2_werror_flag=''
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_configargs='--cache-file=./config.cache --enable-multilib   '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking'
target_configdirs=' libgcc libgomp libstdc++-v3 libmudflap libssp libquadmath libgfortran boehm-gc libffi zlib libjava libobjc'
target_cpu='x86_64'
target_noncanonical='x86_64-unknown-linux-gnu'
target_os='linux-gnu'
target_subdir='x86_64-unknown-linux-gnu'
target_vendor='unknown'
tooldir='${exec_prefix}/x86_64-unknown-linux-gnu'

## ------------------- ##
## File substitutions. ##
## ------------------- ##

alphaieee_frag='/dev/null'
host_makefile_frag='/dev/null'
ospace_frag='/dev/null'
serialization_dependencies='serdep.tmp'
target_makefile_frag='/home/myusername/gcc-temp/gcc-4.6.3/config/mt-gnu'

## ----------- ##
## confdefs.h. ##
## ----------- ##

/* confdefs.h */
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE_URL ""
#define LT_OBJDIR ".libs/"

configure: exit 0